Hettich Actro 5D 450mm Soft-Close Full Extension Undermount Drawer Slides, Ball Bearing Right hand Zinc - 9257076

Hettich Actro 5D 450mm Drawer Slide Performance

Hettich Actro 5D 450mm drawer slide is a soft-close full extension undermount drawer runner designed for wooden drawers, so the mechanism stays hidden while still delivering complete access to the drawer depth on installations that demand a clean look.

This runner is specified with load classes XS (10 kg) / L (40 kg) / XL (70 kg) and a stated 88 lb load capacity to EN 15338, Level 3, so the slide is engineered to carry common drawer loads within a standardized performance framework for furniture hardware.

The product is a right hand galvanized steel runner, so it is intended to be used on the right side of the drawer system and offers corrosion-resistant zinc protection that supports stable operation in typical cabinet environments.

The runner is part of the Actro 5D system, which offers tool-less height adjustment up to plus 3 mm, side adjustment up to plus or minus 1.5 mm, tilt adjustment up to plus 4 mm and radial adjustment up to plus or minus 1.5 mm, so installers can finely align drawer fronts and movement without separate tools once the runner is in place.

The soft-close function and full extension design work together to let drawers close gently while still opening the full length of the slide, which helps reduce slamming impacts and allows convenient access to the rear storage area in everyday use.

Key Details That Support Drawer Projects

• The full extension runner design lets the drawer travel the complete 450 mm length, which gives access to stored items at the back of the drawer without shifting contents around during use.
• The soft-close function slows the drawer at the end of travel, which reduces closing shock on the cabinet and hardware and helps maintain smoother operation over many open-and-close cycles.
• Load classes XS (10 kg) / L (40 kg) / XL (70 kg) and the 88 lb load capacity to EN 15338, Level 3, define the weight range the runner is built to support, which helps match drawers to predictable loading conditions in service.
• Tool-less height adjustment up to plus 3 mm lets installers move the drawer front vertically on the runner, which helps align reveals between adjacent fronts after the drawer has already been hung.
• Side adjustment up to plus or minus 1.5 mm on the Actro 5D system allows lateral fine-tuning, which is useful when aligning gaps to side panels or neighboring drawers where carcass tolerances vary.
• Tilt adjustment up to plus 4 mm and radial adjustment up to plus or minus 1.5 mm allow further front-plane and depth fine-tuning, which supports square-appearing fronts and consistent closing behavior across a drawer bank.
• The galvanized steel construction provides a zinc-protected surface on the runner, which supports long-term structural stability of the slide components in typical indoor woodworking and cabinet applications.

Actro 5D Undermount Slide Fit And Adjustment

This full extension undermount drawer slide is specified at 450 mm length, so it suits drawer projects planned around that nominal runner length where the cabinet depth allows the slide to operate through its full travel range.

The undermount configuration is designed for combining with wooden drawers, so the runner supports the drawer from below rather than at the sides, leaving outer drawer surfaces free for design while still transmitting the load into the slide mechanism.

Tool-less height adjustment up to plus 3 mm provides vertical alignment once the drawer is hanging on the runner, so minor carcass and drawer dimension variations can be absorbed without reworking the box or front.

Side adjustment of plus or minus 1.5 mm built into the Actro 5D runner supports lateral fine-tuning of the drawer front relative to the face frame or case sides, which is important for parallel reveals across multiple fronts in a run of cabinetry.

Tilt adjustment up to plus 4 mm lets installers control the angular position of the front relative to the cabinet, so the top and bottom gaps can be visually balanced when the cabinet or floor is not perfectly level.

Radial adjustment of plus or minus 1.5 mm further refines the front-to-carcass relationship, supporting consistent closing behavior and contact points across drawers using the same Hettich Actro 5D 450mm drawer slide system.

Using This Hettich 9257076 Runner In Real Projects

Where This Full Extension Runner Is Applied

The Hettich Actro 5D 450mm soft-close full extension undermount drawer slide is specified as a full extension runner for combining with wooden drawers, so it is suited to cabinet projects where wood drawer boxes ride on hidden runners under the drawer bottom.

The 450 mm nominal length centers this runner in applications where cabinet depth and drawer depth are coordinated to that size, which is common in many built-in furniture and kitchen drawer layouts that are planned around metric or near-metric module depths.

The runner is described as a right hand galvanized steel unit under SAP description ACTRO 5D RUNNER 88LB 450MM RH and manufacturer part number 9318252, so it functions as the right side slide in an undermount pair when matched with its corresponding left hand component in the same system.

The load classes XS (10 kg) / L (40 kg) / XL (70 kg) and the 88 lb load capacity to EN 15338, Level 3, position this runner for drawers that need to support weight ranging from light contents through heavier stored items within that class structure, which suits many general storage and kitchen uses.

The galvanized steel material of the Hettich 9257076 right hand runner provides a zinc-coated surface on the slide elements, which supports the integrity of moving parts in typical interior woodworking environments where metal components are routinely exposed to humidity and regular motion.

Why Actro 5D 5-Way Adjustment Matters

The Actro 5D undermount drawer slide offers tool-less height adjustment up to plus 3 mm, which allows vertical repositioning of the drawer relative to the cabinet after installation so installers can dial in even horizontal lines across stacked drawers.

Side adjustment up to plus or minus 1.5 mm is built into this Hettich Actro 5D 450mm drawer slide, which helps compensate for small variations in cabinet width or drawer construction and yields consistent side gaps when multiple units are installed in a bank.

Tilt adjustment up to plus 4 mm on the runner allows the drawer front to be rotated within a controlled range, so the top and bottom of the front can align visually with adjacent doors or drawers even when the cabinet structure is slightly out of square.

Radial adjustment up to plus or minus 1.5 mm lets the installer shift the drawer front relative to the carcass depth-wise, which helps fine-tune how the front sits against face frames or front edges, supporting flush fronts or controlled projection as required by the design.

The soft-close function, combined with this 5D adjustment capability, supports alignment that keeps both sides of the drawer entering the cabinet evenly, which reduces racking forces on the runner and helps maintain smooth closing action within the defined load capacity.

Because the runner is full extension and built to EN 15338, Level 3, the undermount system is designed to carry the specified loads throughout the entire slide travel, so correctly sized wooden drawers can operate from fully closed to fully open while remaining supported along that path.

Common Questions About This Actro 5D Runner

Selecting This Runner For Drawer Projects

The Hettich Actro 5D 450mm drawer slide combines soft-close full extension performance, EN 15338 Level 3 88 lb load capacity and 5D tool-less adjustment, so it suits professional and serious DIY drawer projects using wooden drawers built around a 450 mm undermount runner layout.