Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This screw-on steel rear mounting bracket gives Blum TANDEM and MOVENTO drawer slides the back-end support they need in face-frame cabinet construction, where the cabinet side is set back from the front frame and the rear of the slide has nothing to land on without it.
Blum TANDEM and MOVENTO undermount slides are designed to screw directly to a frameless cabinet's flat interior side panels. In a face-frame cabinet, the side panel is recessed behind the front frame, leaving the rear of the slide unsupported unless a dedicated bracket picks it up. Without this bracket, the slide can flex, rack, or sit out of level — all of which show up as drawer-front alignment problems that are hard to diagnose after the fact. Installing the rear mounting bracket at the back of the cabinet gives the slide a stable, level anchor point so the drawer rides true from front to back.
The bracket is steel with a zinc plating that protects against the light moisture and humidity typical of residential kitchen and bath environments. Zinc is a functional, workhorse finish here — it is not decorative, since the bracket disappears inside the cabinet once the drawer is installed. The steel construction handles the leverage loads that come with a fully loaded drawer acting on a cantilevered rear support point.
This bracket is the right call any time a Blum TANDEM or MOVENTO undermount slide goes into a face-frame cabinet and the standard frameless-style direct-to-panel mounting is not possible. Cabinet shops running mixed face-frame and frameless production will want these on hand whenever the face-frame jobs come through. Replacement and service work — re-hanging drawers in existing face-frame kitchens — is another steady use case, since the original bracket is often missing or damaged when slides are upgraded. This bracket is for indoor, dry cabinet applications only; it is not rated for wet, exterior, or corrosive environments.
Yes — the product name and series data confirm compatibility with both Blum TANDEM and MOVENTO undermount platforms. Do not use it with other brands' undermount slides; locking geometries and mounting patterns differ by system.
No. In a frameless cabinet the slide screws directly to the flat interior side panel and rear brackets are not required. This bracket is specifically for face-frame construction where the back end of the slide needs its own anchor point.
No — this is the standard rear mounting bracket (295.3750.02). Blum also offers a narrow variant for tighter installation spaces; confirm which version suits your cabinet depth and opening before ordering.
Screw inclusion is not confirmed in the product data. Have your standard cabinet installation screws on hand and refer to the Blum installation guide for the specified fastener size for this bracket.
Stocking this bracket means a face-frame job never stalls because the rear anchor is missing — the slide goes in level, the drawer hangs right the first time, and the install moves on.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 100 Each |  BP612TH100 Mfr# 612TH-100 | Blum #6 x 1/2" Truss Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Zinc, 29173712 - 100/Box |
