1-15/16" Rail End Cap Set for E-Glide Ladder Rail, Satin Nickel

Rail End Cap Set For E-Glide Ladder Rails

rail end cap set describes this Quiet Glide component that functions as the rail end stop for E-Glide ladder systems, so it finishes the end of the ladder rail and defines the travel point on the system. This EG.40.02 set is part of the additional E-Glide ladder rail components for adding rails or setting up multiple walls, so it supports layouts where the same ladder needs to run along more than one rail section. The satin nickel finish ties in with other E-Glide ladder hardware in the same finish, which keeps the rail terminations visually consistent across a run. The design works specifically as a rail end stop for E-Glide ladder systems, so it performs a defined role in the rolling library ladder assembly rather than acting as a general-purpose cap.

Key Rail End Stop Details That Matter On Site

• The product is described as additional E-Glide ladder rail components for adding rails or having multiple walls for E-Glide ladder packages, which means it supports extended rail runs where the ladder rail continues across more than one wall section in a project.
• The part functions as a rail end stop for E-Glide ladder systems, so it provides a defined end point on the rail where the moving ladder hardware interacts with the rail termination during operation.
• The design is described as flat design for a simple look, which keeps the end of the E-Glide rail visually low-profile and straightforward when viewed along built-in bookcases or cabinetry.
• The rail end stops are to used in conjunction with rail model number EG.4004.06 when multiple wall rails are needed, so this part ties directly into that specific E-Glide rail model in multi-wall ladder layouts.
• The rail end stop dimensions are 1-15/16 inch diameter x 1/8 inch D, so the round face size and shallow depth help the cap sit compactly at the rail end while covering the diameter of the matched E-Glide rail.

Rail End Stop Fit, Dimensions, And Alignment

Quiet Glide rail end stop EG.40.02 is specified as a rail end stop for E-Glide ladder systems, so it is shaped and sized to work within that library ladder rail family. The part is described as to used in conjunction with rail model number EG.4004.06 when multiple wall rails are needed, so it fits into layouts where that exact E-Glide rail model continues across different walls. The stated rail end stop dimensions of 1-15/16 inch diameter x 1/8 inch D define the round face size and the low projection, which helps installers anticipate how far the stop will extend from the wall or mounting surface when positioning trims or adjacent cabinetry.

How This Rail End Cap Set Supports Ladder Layouts

Where This E-Glide Rail End Cap Set Is Used

This Quiet Glide rail end cap set is identified as additional E-Glide ladder rail components for adding rails or have multiple walls for E-Glide ladder packages, so it is intended for use in rolling library ladder installations built around the E-Glide system. Because it serves as a rail end stop for E-Glide ladder systems, it sits at the termination points of the rail where the ladder travel effectively ends. The note that rail end stops are to used in conjunction with rail model number EG.4004.06 when multiple wall rails are needed ties the set directly to that rail size and profile, so it belongs at the ends of EG.4004.06 rails arranged along more than one wall. The satin nickel description from EG RAIL END CAP SET, SATIN NICKEL and 1-15/16 inch Rail End Cap Set for E-Glide Ladder Rail, Satin Nickel means it visually matches satin nickel-finished E-Glide ladder components that share the same finish callout in the system.

Why The EG.40.02 Details Support Repeatable Results

The manufacturer part number EG.40.02 uniquely identifies this rail end cap set within the Quiet Glide E-Glide ladder rail components, so specifying that code helps align orders and drawings to the correct end stop piece on a multi-part ladder project. Its role as a rail end stop for E-Glide ladder systems means the component is dedicated to closing off the open rail profile, which can help define ladder movement limits consistently along each rail section. The description that rail end stops are to used in conjunction with rail model number EG.4004.06 when multiple wall rails are needed ties the part into a predictable pairing, so drawings that call out EG.4004.06 rail can reference EG.40.02 when showing the rail terminations across the wall layout. The flat design for a simple look characteristic supports consistent visual lines at each end of the EG.4004.06 rail, which keeps the rail terminations uniform where multiple rails meet corners or transitions between walls in a rolling library ladder installation.

Common Questions About This Rail End Cap Set

Choose This E-Glide Rail End Cap For Defined Rail Stops

The Quiet Glide EG.40.02 rail end cap set is described as a rail end stop for E-Glide ladder systems, so it gives each E-Glide rail a defined termination point. Its role as additional E-Glide ladder rail components for adding rails or have multiple walls for E-Glide ladder packages supports projects where EG.4004.06 rails run across more than one wall. The satin nickel callout and flat design for a simple look keep appearances consistent at both ends of each rail. Use the 1-15/16 inch diameter x 1/8 inch D dimensions and the EG.4004.06 pairing details to plan rail terminations that match the rest of the E-Glide ladder installation.