Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
TRAVER W/FTG PLATE FOR CWP 3/4 D31.49IN identifies a Vauth-Sagel traversing part built for a CWP 3/4 system, so installers can match the component accurately to the correct cabinet convenience hardware layout. The 31.49IN reference describes the working length, which guides layout in wider cabinet openings where consistent spacing is critical for smooth internal movement. The integrated FTG plate in this traversing element defines a fixed interface point, giving you a repeatable mounting reference within the CWP 3/4 assembly. The S10000871 manufacturer part number ties this specific traversing configuration back to Vauth-Sagel documentation, which helps align ordering, job files, and system diagrams on multi-cabinet runs.
The 31.49IN length in the TRAVER W/FTG PLATE FOR CWP 3/4 D31.49IN description gives a fixed planning dimension, so cabinet layouts can be drawn knowing the traversing element will span that distance inside the CWP 3/4 zone. Because the FTG plate is part of this traverser, the mounting interface is defined by the plate geometry rather than field-built spacer blocks, which helps keep internal hardware lines straight across aligned cabinets. With Vauth-Sagel as the brand, this component is intended to sit within a coordinated convenience hardware system, allowing installers to map the traversing run in relation to other CWP 3/4 components during installation.
The TRAVER W/FTG PLATE FOR CWP 3/4 D31.49IN designation places this component directly inside a CWP 3/4-based convenience setup, giving you a traversing member sized to 31.49IN for that specific system. Within a cabinet, that length helps define the horizontal reach available for connected moving parts that rely on the traverser for support or guidance. Because the FTG plate is part of the assembly, the traverser presents a controlled interface surface within the CWP 3/4 arrangement, which matters when other hardware elements reference that plate position. In jobs that repeat the same convenience layout across multiple openings, using the same 31.49IN CWP 3/4 travers component supports uniform cabinet geometry.
The FTG plate identified in TRAVER W/FTG PLATE FOR CWP 3/4 D31.49IN establishes a built-in contact plate on the traverser, which gives a defined edge or surface for locating mating CWP 3/4 hardware. That built-in interface reduces variability compared with improvising individual mounting points, supporting cleaner lines in convenience hardware runs. The 31.49IN span ties this fixed plate to a predictable distance across the cabinet interior, so installers can reference that dimension when setting related components to maintain symmetry. With Vauth-Sagel and the S10000871 part number tied to the same traversing plate, replacements or expansions can follow the same alignment strategy on future work, helping keep cabinet interiors visually and functionally consistent over time.
The TRAVER W/FTG PLATE FOR CWP 3/4 D31.49IN description identifies a traversing component with an integrated plate, sized for a CWP 3/4 convenience system and referenced to a 31.49IN length.
The 31.49IN length gives a defined span for the traverser inside the CWP 3/4 zone, helping plan cabinet opening width and internal hardware spacing around that fixed dimension.
The FTG plate on the traverser provides a built-in interface surface within the CWP 3/4 assembly, creating a repeatable reference area for related convenience hardware components.
The CWP 3/4 reference in the description ties the traverser and FTG plate to that specific convenience system, indicating it is sized and configured to work within that layout.
The Vauth-Sagel S10000871 number uniquely identifies this traversing plate configuration, helping match orders, documentation, and replacements to the correct CWP 3/4 component.
This traversing plate uses a fixed 31.49IN length and integrated FTG plate, so repeating the same part across cabinets supports matching internal geometry and alignment.
This Vauth-Sagel TRAVER W/FTG PLATE FOR CWP 3/4 D31.49IN provides a traversing member and plate interface sized around a 31.49IN span, giving you a defined dimension and reference surface inside a CWP 3/4 convenience layout. When a project is built around that system and length, choosing this S10000871 component aligns the cabinet interior geometry with the intended design. For work centered on CWP 3/4 convenience hardware, this traversing plate offers a part-numbered path to consistent planning, installation, and future duplication of the same internal configuration.
Sold In: 1 Each