Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune HH-KS114S recess pull gives you a low-profile way to open doors or panels while keeping surfaces clear, so hardware stays out of the way on tight projects. The part is described as a recess pull, which means it sits down into the material rather than projecting, and that helps reduce snag points on cabinetry, hatches, or panels that see regular traffic. The 114mm overall length provides a defined gripping area across a moderate span, which supports a full-hand pull instead of fingertip-only operation on wider doors or drawers. The HH-KS designation identifies the specific Sugatsune pattern, so installers working from prints or repeat standards can match this pull confidently from one job to the next. With a dedicated manufacturer part number and consistent length reference, this pull supports repeatable layouts across runs of cabinets or access panels.
The Sugatsune HH-KS114S recess pull is identified as a recess pull in surface hardware, so installation centers around routing or machining a pocket so the body sits down into the workpiece while the front edge remains accessible by hand. Because the pull has a defined 114mm overall length, installers can base cutout length and edge clearances on that dimension when laying out multiple pulls on a door bank or panel array. Using a consistent part number also keeps jigs and templates relevant from job to job, since the overall length and basic footprint remain the same each time this model is used. With these defined characteristics, the HH-KS114S supports straightforward planning for both new builds and replacements where a similar recess pull footprint is already present.
The HH-KS114S recess pull is described as surface hardware, which positions it well for visible locations on cabinets, drawers, and access panels where hardware selection sets the tone of the finished face. Its 114mm overall length provides a balanced scale for medium-width fronts, giving users enough room to grab without overwhelming the panel visually. Being a recess pull, it sits down into the material, so the grip point is integrated into the surface instead of protruding into walkways or work zones, which is practical on tight corridors, equipment panels, or utility cabinetry. The 304/316 stainless steel construction supports use in areas where cleaning and routine contact are normal, such as workstations, storage rooms, or shop cabinetry, because the metal composition is suited to typical indoor service conditions. With a clearly defined manufacturer part number, this pull also fits project specifications that call out Sugatsune HH-KS series hardware by number.
The Sugatsune HH-KS114S recess pull uses the HH-KS series designation together with a 114mm overall length, so fabricators can standardize drawings and machining programs around a single reference. The repeated use of that exact length simplifies recurring layouts across doors or panels, which helps maintain straight sightlines and uniform spacing on banks of cabinetry. The 304/316 stainless steel description means the material is already defined for specification sheets, reducing variation when matching existing installations that call for stainless recess pulls in the same series. Because the part is identified specifically as a recess pull, it also aligns well with established cutout practices for inset grips, supporting predictable fit when replacing another HH-KS114S or when migrating a project line to this exact model.
The HH-KS114S is specified as a recess pull in Sugatsune surface hardware, so it functions as a low-profile handhold set into the surface of a door, drawer, or panel.
The Sugatsune HH-KS114S recess pull has an overall length of 114mm, which gives a defined layout dimension for cutouts and alignment across multiple cabinet or panel fronts.
The HH-KS114S recess pull is described as 304/316 stainless steel, providing a stainless construction suited to typical indoor woodworking and casework environments that see regular use and cleaning.
The HH-KS114S uses a recess pull format and 114mm overall length, so installers can plan consistent cutouts and spacing, supporting straight lines and repeatable hardware positions.
The HH-KS114S manufacturer part number ties directly to the Sugatsune HH-KS series, helping match existing recess pulls and maintain the same size and stainless material on replacement work.
The 304/316 stainless recess pull suits visible cabinet, drawer, and panel fronts in woodworking projects where a low-profile grip and stainless surface hardware are desired.
The Sugatsune HH-KS114S recess pull, with its 114mm overall length and 304/316 stainless steel description, gives project teams a defined, repeatable choice for low-profile gripping points on doors, drawers, and panels. The HH-KS series designation and specific part number support consistent selection across new builds and replacements, so drawings and machining setups stay aligned from job to job. For cabinet shops, millwork operations, and serious DIY users who prefer clearly identified hardware, this recess pull offers a straightforward, spec-driven option ready to drop into surface hardware plans.
Sold In: 1 Each