Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFSC8154MUF1 to RSFSC8154MUF1.
Omega National 54 inch maple floating shelf provides a 54 inch wide, 10 inch deep surface that mounts as a floating shelf, giving closet, kitchen, or garage runs a defined storage span along the wall. The subtly curved 8-1/2 inch radius edge changes a straight run of shelving into a softer front profile, which helps differentiate feature walls or open storage from standard flat-edged boards. Solid wood and wood veneer construction creates a wood-based shelf body that supports everyday household or shop items while keeping a traditional woodworking material in the build. The maple construction on this model matches projects that already use maple fronts or trim, helping runs of shelving look intentional rather than pieced together. The shelf is sanded and ready to finish, so installers can stain or paint on site to match surrounding cabinetry, wall color, or trim.
The unique hanging system on this maple floating shelf relies on concealed brackets that carry the load inside the shelf body, so the wall face stays clear of visible supports. This layout creates straight reference lines at installation, helping installers set the 54 inch length parallel to nearby cabinets or trim without working around exposed hardware. The system is designed as a complete turn-key approach, which means the mounting components are coordinated to the shelf geometry and rated capacity, simplifying planning when repeating the same detail across a room. The no visible hardware design also reduces later alignment work because nothing projects below the shelf to conflict with doors, hooks, or tall items stored underneath the shelf run.
This curved 54 inch maple floating shelf works as a straight-run component wherever a clean wall-mounted surface is needed. The 54 inch width naturally spans common stud spacing layouts and small wall sections, which helps installers tie the shelf into framing while keeping an uninterrupted front line. In closet or mudroom runs, the 10 inch depth offers space for folded items or bins without projecting as far as deeper countertop-grade surfaces. The subtly curved 8-1/2 inch radius edge is especially useful on exposed walls such as entries, kitchens, or office nooks, where a softer front profile reads more finished than a square-cut board. Because the shelf is sanded and ready to finish, the same product can be used in multiple rooms with different stains or paints while keeping the geometry consistent across the project.
The solid wood and wood veneer shelf body gives installers a familiar substrate for fastening into the hidden hanging brackets, which supports consistent alignment from job to job. The unique hanging system is engineered for a 100 pound capacity when used with the standard brackets, so planners can size loads with that rating in mind rather than guessing performance. Meeting or exceeding BHMA standards for safety and strength provides a tested benchmark behind the 100 pound capacity claim, which matters when shelving is installed over walkways, counters, or work surfaces. The concealed hardware layout prevents visual clutter below the shelf, keeping the focus on the curved maple front and any millwork finishing done on site. Since the shelf is sanded and ready to finish, crews can correct minor handling marks and then apply matching coatings, which helps maintain a consistent appearance even across multiple installation days.
The Omega National 54 inch maple floating shelf measures 54 inches long with a standard 10 inch depth, so it lays out like a typical shallow wall shelf along a mid-size wall section.
The curved 8-1/2 inch radius edge softens the front profile compared with a square edge, which helps finished walls and open storage areas look more custom and less utilitarian.
This model uses solid wood and wood veneer construction in maple, giving installers a traditional wood substrate that finishes and machines like other maple components.
The floating shelf is rated for a 100 pound capacity with its hanging brackets, so designers can plan typical residential storage loads within that tested range.
The unique hanging system uses hidden brackets to support the shelf, which keeps the wall face clean and provides a straight reference for leveling and aligning multiple shelves.
The shelf is sanded and ready to finish, so finishers can apply matching stain, clear coat, or paint during the same workflow as nearby cabinetry or trim.
This Omega National 54 inch maple floating shelf with curved front edge ties solid wood and wood veneer construction to a concealed hanging system rated at 100 pounds, giving projects a clean, floating look with a published capacity. The standard 10 inch depth and 54 inch length simplify layout across closets, feature walls, or office nooks that repeat the same span. Because the shelf is sanded and ready to finish and meets or exceeds BHMA standards for safety and strength, it suits jobs where appearance and tested performance both matter. Choose this model when a curved maple floating shelf aligns with the room design and a 54 inch by 10 inch footprint fits the wall.
Sold In: 1 Each