Two-Tone Artisan 36" Wide Wall Hood, Paint Grade w/ Removable Red Oak Apron, RC30B36SMB1XOUF4

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPRC30B36SMB1XOUF4 to RSRC30B36SMB1XOUF4.

Two-Tone Artisan 36 Inch Wall Hood For Custom Kitchens

Two-Tone Artisan 36 inch Wall Hood from Omega National Products is a wood wall hood designed for 36 inch wide wall applications, giving cabinet shops a ready-made focal point that ties into standard upper cabinet runs. The paint grade construction allows shops to finish the primary hood body to match or contrast surrounding cabinetry, so the hood can follow the same coating system already used on the job. A removable red oak apron lets finishers apply a separate stain or clear finish on the apron, creating a defined two-tone look without extra field-built trim work. The 36 inch width helps align this hood over typical 30 inch cooking equipment when centered within a 36 inch cabinet opening. The wall hood format suits installations where the unit mounts to the wall structure behind the cabinets, fitting into common kitchen layouts.

Key Wood Hood Details That Support Shop Workflow

• The Two-Tone Artisan 36 inch Wall Hood is built as a wood product, so woodworking shops can sand, prime, and finish it using familiar cabinet finishing processes on the same benches and equipment.
• The paint grade body gives finish crews a neutral surface intended for painted systems, reducing prep time compared to converting a prefinished surface before applying color coats to match the job.
• The removable red oak apron provides a defined solid wood element that can be finished separately, which helps installers and finishers coordinate stained accents with other red oak components in the kitchen.
• The 36 inch wide wall hood format aligns with typical 36 inch cabinet modules, helping designers and installers lay out uppers and the hood as a single run without custom carcass fabrication.
• The Omega National Products brand identifies a dedicated wood products manufacturer, which matters to shops that routinely integrate factory-built wood hoods into their cabinet lines.

Wall Hood Fit And Finish Planning For Installers

This Two-Tone Artisan 36 inch Wall Hood is defined as a wall hood, so it is intended to be mounted against the wall within a standard wall cabinet layout, which guides how installers frame and plan their upper runs. The 36 inch width helps layout work because it corresponds to a common cabinet size, simplifying design when centering over a cooking area. The paint grade body signals that the hood is ready for a painted finish system, so finishers can schedule priming and topcoating alongside painted doors and face frames. The removable red oak apron is a distinct component that can be taken off for separate finishing, which allows staining or clear-coating that apron without affecting the painted body and supports a clean transition line between finishes.

Using This Omega National Wall Hood On Projects

Where This 36 Inch Wood Wall Hood Fits Best

The Two-Tone Artisan 36 inch Wall Hood is suited to wall-mounted kitchen layouts built around a 36 inch wide upper cabinet bay, because its stated width is 36 inches. That dimension lines up with common cabinet module planning, so designers can drop this hood into drawings where a 36 inch wall unit would normally sit. As a wood wall hood from Omega National Products, it falls naturally into projects that already specify wood cabinets, allowing the hood to be finished to visually match those components. The paint grade body is tailored to painted kitchens, so it works especially well in designs calling for solid-color finishes on surrounding cabinets. The removable red oak apron supports kitchens that mix painted cabinetry with stained red oak accents, tying the hood into other red oak trim or panels in the room.

How Two-Tone Details Support Consistent Results

The paint grade construction of the main hood body helps finishing teams achieve consistent color and sheen with the rest of the job, because the surface is intended for paint rather than stain. That reduces variability when spraying large orders of doors, face frames, and this hood together. The removable red oak apron provides a clearly defined hardwood element, so shops can process it through their stain and clear coat schedule alongside other red oak parts, maintaining color consistency from one component to the next. Separating the apron from the main hood body during finishing allows clean tape lines and edges, which supports a crisp transition between painted and stained areas once reassembled. The 36 inch wide wall hood format gives installers a predictable footprint to work with, which can reduce layout adjustments on site when aligning the hood with cabinets and cooking equipment in the same bay.

Practical Questions About This Wood Wall Hood

Selecting This Two-Tone Hood For Cabinet Projects

The Two-Tone Artisan 36 inch Wall Hood, paint grade with removable red oak apron, offers cabinet and millwork shops a defined 36 inch wide wood hood that drops into wall cabinet runs. The paint grade body supports painted kitchen designs, while the removable red oak apron provides a coordinated stained or clear-finished accent. With Omega National Products identified as the brand and RC30B36SMB1XOUF4 as the part number, this hood can be specified consistently across drawings, bids, and orders when a two-tone wood wall hood is required.