NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPRC30B48SMB1XEUF4 to RSRC30B48SMB1XEUF4.
Two-Tone Artisan 48 inch Wall Hood from Omega National Products is a wood wall hood that provides a finished focal point over a cooking area while matching surrounding cabinetry work. The 48 inch width gives broad coverage over typical cooking zones, which supports visual balance across a longer run of upper cabinets. The paint grade construction lets finish shops or installers apply their own coating system, so the hood can tie into existing color programs on a job. A removable walnut apron adds a natural wood accent at the front of the hood, which helps create a defined break between painted surfaces and solid wood grain. Because the apron is removable, finishing and detailing can be handled separately from the main hood body, which can simplify shop workflow when different stains and paints are required on the same assembly.
This Two-Tone Artisan 48 inch Wall Hood is designed as a wall hood, which means it mounts against a wall surface as part of a kitchen upper run. The 48 inch width informs layout decisions, since it typically aligns with a corresponding 48 inch cooking area beneath. Because the hood is paint grade, many installers will sequence the work so that cutting, sanding, and priming happen before wall mounting, which can reduce touchup after the hood is in place. The removable walnut apron can be handled as a separate finishing step from the main body, so the stained walnut portion can be processed in a different finishing pass than the painted surfaces. This separation supports cleaner transitions between colors and materials when the assembled hood is finally installed on the wall.
The Two-Tone Artisan 48 inch Wall Hood from Omega National Products belongs in kitchen layouts that call for a 48 inch wide focal point above a cooking station. As a wood product, it integrates into projects where cabinets and trim are also wood, so shops can use the same tooling, sanding routines, and finishing booths across doors, frames, and this hood. Being part of the wood products category, the hood suits custom and semi-custom jobs where field modification and in-shop adjustments are common. The paint grade body lets project teams match current or future paint colors across an entire kitchen, which helps when coordinating with existing cabinets during remodel work or when building new installations that must follow a designer-specified palette.
The removable walnut apron on this wall hood allows finishing operations to treat the walnut element independently from the painted main hood, so stain steps, seal coats, and clear topcoats on the walnut do not interfere with paint processes. This separation helps maintain cleaner edges where the apron meets the painted surfaces, which is useful on repeat jobs where a consistent two-tone transition is expected. The specific manufacturer part number RC30B48SMB1XEUF4 gives shops a clear way to reorder the same configuration, so once spray schedules and sanding sequences are dialed in for this hood, they can be repeated on future projects. The 48 inch wall hood format also creates a predictable center section in the elevation, which helps designers and installers align adjacent wall cabinets, crown details, and wood trim without constant re-measuring across different hood widths.
The Two-Tone Artisan 48 inch Wall Hood is a wood wall hood from Omega National Products, so it serves as a finished wood hood structure above a cooking area in kitchen projects.
The Omega National Two-Tone Artisan hood is 48 inches wide, which suits cooking areas and cabinet runs planned around a 48 inch center section in the wall elevation.
The wall hood is described as paint grade, meaning the wood body is suited to receive shop-applied primer and paint so it can match the color of surrounding cabinetry.
The removable walnut apron provides a walnut accent at the front of the hood and can be finished separately, which supports a controlled two-tone look with distinct stain and paint areas.
The RC30B48SMB1XEUF4 wall hood is manufactured by Omega National Products, a brand that supplies wood products for kitchen and cabinet applications.
The 48 inch size sets a clear width for the cooking focal point, which helps designers align neighboring wall cabinets and trim details around this fixed center section.
The Two-Tone Artisan 48 inch Wall Hood, paint grade with removable walnut apron, gives wood shops and installers a defined wood hood solution that fits 48 inch wall layouts. The paint grade body provides flexibility for matching existing or planned cabinet colors on a job. The walnut apron offers a built-in two-tone focal detail that can be stained and finished on its own schedule. With a specific Omega National Products part number, RC30B48SMB1XEUF4, this hood can be specified consistently across multiple projects. For kitchen work that centers on wood products and controlled color programs, this model provides a straightforward, repeatable hood choice.
Sold In: 1 Each