Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 4WCBM waste pullout pairs a prefinished maple carriage with two 32 quart silver metallic bins, bringing sorted waste and recycling behind a base cabinet door on a bottom-mount, door-coupled slide system.
A double-bin layout handles the everyday split between trash and recycling without dedicating two separate cabinet bays to the job. Both bins ride on the same carriage and come forward together, so emptying one does not require fishing around the other. The over-travel extension carries the unit past the cabinet face entirely, which means the rear bin is just as easy to reach as the front one. At 20-1/4 inches wide, this carriage fits a broader base cabinet opening where a narrow single-bin unit would leave room unused.
The carriage is built from maple and arrives prefinished, so there is no prep work before installation. The two bins are silver metallic, a finish that coordinates across a range of cabinet interiors. The slide system does the real work on a loaded double-bin unit: soft-open eases the carriage forward at the start of travel, and soft-close brings it back under control so the weight of two full bins does not drive a hard stop. The bottom-mount configuration keeps the hardware under the carriage and out of sight, and the door-mount bracket ties the pullout to the cabinet door so the whole unit operates as one motion.
This is the right choice for a kitchen with a wider base cabinet and enough depth for two bins side by side, where a single-bin unit would underuse the space. The minimum cabinet opening is 20-3/8 inches wide, 19-3/8 inches tall, and 21-7/8 inches deep, so measure the clear interior before ordering. Cabinet shops and contractors specifying for a kitchen renovation will find the prefinished maple carriage a time saver on site. Homeowners remodeling on their own get a unit that is dimensioned, finished, and ready to mount without extra prep steps.
The minimum opening is 20-3/8 inches wide, 19-3/8 inches tall, and 21-7/8 inches deep. Measure the clear interior of the cabinet before ordering to confirm fit.
Yes. Two 32 quart silver metallic bins are included with the carriage. Lids are not referenced in the source data for this configuration; check the product listing for lid availability.
Door-mount hardware is part of the 4WCBM series configuration. Confirm what is included in the box against the product spec sheet, as some door-mount components may be sold separately depending on the configuration.
It is prefinished. The maple frame arrives ready to install without sanding, staining, or sealing.
Soft-open controls the outward motion, easing the carriage forward at the start of travel. Soft-close controls the return, pulling the carriage back gently instead of letting it slam shut. This unit has both.
A prefinished maple carriage, two silver metallic bins, and controlled motion in both directions make this pullout a practical solution for a wide base cabinet where waste and recycling need to share one organized space.
Sold In: 1 Each
