Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf 4WC bottom mount waste pullout is a solid maple wood construction unit that organizes waste inside the cabinet, so the trash setup tucks into the base and keeps the cabinet interior looking finished on install. The bottom mount design lets the pullout fasten to the cabinet floor, which helps installers use the cabinet box for strength instead of relying on door hinges for support. Solid maple wood construction provides a rigid frame around the waste containers, helping the pullout track straight on its slides under everyday loading. Solid dovetail drawer construction ties the sides of the frame together, so the corners stay tight and square as the unit opens and closes in service. This bottom mount pullout belongs in the Bottom Mount Trash Pullouts class, giving installers a predictable cabinet-based mounting style for planning layouts.
The maple bottom mount waste pullout uses BLUM undermount soft-close slides, so the running gear fastens beneath the frame and stays hidden while guiding the motion of the unit. The bottom mount construction means the installer positions the frame on the cabinet floor, which gives a clear reference surface for setting the unit square to the front. The pullout design works with cabinet openings that support a 20-31/32 inch deep configuration, so the frame and slides can travel fully inside typical base cabinet depths. With the unit holding 110 lbs., the installer can plan for both containers and normal waste loads while staying within the rated capacity of the slide system.
The Rev-A-Shelf 4WC waste container design sits in the Kitchen & Bath Cabinet Accessories and Trash Pull-Outs categories, which positions it for base cabinets in kitchen or bath layouts that benefit from concealed waste. The frame is built as a bottom mount trash pullout, so it is suited to cabinets with a solid floor where the slides and frame can anchor directly into the substrate. With two silver 32 quart waste containers in the frame, the unit supports a pair of receptacles, which can be used side by side in cabinets sized to accept the dual-bin configuration. The green 32 quart lid fits one of the containers, which allows that bin to act as a covered receptacle when a covered can is desired within the pullout assembly.
The 4WC-2432DM2-SC unit holds 110 lbs., so it fits projects that call for regular waste and recycling loads without exceeding the rated support of the BLUM undermount soft-close slides. The maple wood frame construction aligns with cabinet-grade materials, which helps the pullout blend visually when the cabinet is open and supports the look expected in higher-finish installations. Rear storage for bags or other small items occupies the back of the frame, which positions liners or related supplies in the same footprint as the bins for convenient access when servicing the receptacles during regular use.
Solid maple wood construction in the Rev-A-Shelf 4WC bottom mount waste pullout offers a uniform, machined frame, which gives installers consistent reference edges for positioning the slides and squaring the unit in the cabinet opening. Solid dovetail drawer construction joins the frame components mechanically, which resists racking as the loaded bins move, helping the slides stay aligned and reducing the likelihood of binding during service. BLUM undermount soft-close slides support the pullout from below the frame, which distributes the 110 lb rated load along the slide hardware and promotes smooth travel under both light and heavier usage.
The bottom mount design locates fasteners at the cabinet floor, which simplifies layout when multiple units or adjacent storage hardware share the same run of base cabinets. Having rear storage for bags or other small items integrated into the frame keeps consumables within the footprint of the pullout, which streamlines changeover when swapping liners during routine maintenance. With two silver 32 quart waste containers and a green 32 quart lid matched to the frame, the installer works with components sized for this specific 4WC-2432DM2-SC configuration, which supports a predictable fit between the containers, lid, and the maple pullout structure.
The Rev-A-Shelf 4WC waste container uses BLUM undermount soft-close slides, which guide the pullout from beneath the frame and ease it closed for smoother cabinet operation.
The 4WC-2432DM2-SC bottom mount pullout holds 110 lbs., allowing the maple frame, slides, bins, and typical waste load to operate within the rated capacity of the system.
The Rev-A-Shelf 4WC bottom mount waste pullout uses two silver 32 quart waste containers, so the cabinet can house a pair of 32 quart receptacles in the same sliding frame.
The solid maple wood construction provides straight, rigid sides, giving installers clear reference surfaces for aligning the BLUM undermount soft-close slides and squaring the unit.
The green 32 quart lid matches one of the 32 quart containers, allowing that bin to function as a covered receptacle within the Rev-A-Shelf 4WC frame.
Rear storage for bags or other small items keeps liners and related supplies directly behind the bins, so servicing the waste containers stays organized inside the same cabinet space.
The Rev-A-Shelf 4WC bottom mount waste pullout with two 32 quart silver containers and BLUM undermount soft-close slides gives installers a defined 110 lb rated unit for cabinet waste projects. The maple frame, dovetail construction, and rear storage layout offer a ready-to-mount solution that ties waste handling, motion hardware, and organization into a single bottom mount assembly for kitchen and bath cabinet runs.
Sold In: 1 Each
