
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Firenze Collection T-Knob 5 Inch x 1 Inch gives you a defined T-shaped grip that helps open cabinet doors and drawers with a straight, controlled pull, which matters when consistent operation is important across a run of cabinetry. The white marble construction provides a solid, substantial hand feel that supports precise control on heavier fronts. The champagne bronze finish on the knob ties into modern warm-metal hardware programs, so banks of doors read as one coordinated installation. The 5 inch by 1 inch proportion creates a wide grasp area while keeping the projection compact, which helps on narrow drawer fronts or tight galley layouts where clearance is limited. The Belwith Keeler branding identifies this knob within a known decorative hardware line, which helps match existing Firenze pieces during renovation or expansion work. The B077044MW-CBZ part number uniquely identifies this exact marble and champagne bronze combination for repeat orders.
The 5 inch length on the Firenze T-Knob sets a wide grip span, giving installers a clear visual centerline for drilling through cabinet or drawer fronts during layout, which supports consistent knob positioning across a bank. The 1 inch dimension defines the opposing leg of the T-shape, helping set expectations for how far the grip extends relative to the mounting point on overlay or inset fronts. The #8-32 thread on the specified truss head screws aligns with common cabinet knob drilling and tapping practice, keeping the fastening interface familiar on shop-built and site-built work. Having one 1 inch and one 1-1/2 inch #8-32 screw length specified in the product data addresses typical door and drawer thickness ranges, which helps match thread engagement to material thickness so the knob seats firmly without over-penetration.
The Firenze Collection T-Knob 5 Inch x 1 Inch white marble with champagne bronze is suited to cabinet doors and drawers where a horizontal T-grip supports a consistent hand position, which helps users operate fronts without hunting for a small pull point. The white marble body visually lightens the knob against darker cabinet finishes, which can make grab points easier to read along a full run of base or wall cabinets. The champagne bronze detailing ties the knob into trim or plumbing in the same tone, which is useful when coordinating finishes across kitchen, bath, or built-in storage installations. The defined T-shape offers a clear orientation on the face of each front, so installers can align knobs horizontally in relation to rails and stiles for a precise grid look. Because the knob is part of the Firenze Collection, it can be specified alongside other Firenze hardware to carry the same design language from one room or bank of cabinetry to another.
The specific 5 inch x 1 inch sizing of this Belwith Keeler Firenze T-knob gives layout crews a stable reference for jigs or drilling templates, which aids in repeating hole locations accurately across multiple fronts. The B077044MW-CBZ manufacturer part number and FIRENZE T-KNOB,5' X 1',CBZ SAP description clearly identify this exact marble and champagne bronze combination, which supports consistent reordering when expanding an existing run of cabinets. The defined #8-32 x 1 inch and #8-32 x 1-1/2 inch truss head screw specifications provide known options for engaging different front thicknesses, helping maintain full thread engagement while keeping the head style uniform on the inside face. The decorative hardware & moldings knobs classification signals that this component is intended as visible cabinet hardware, so designers can rely on it as a primary touch point rather than a concealed fitting in their layouts.
The knob is specified as 5 inch x 1 inch, which sets the T-bar span and cross dimension, helping installers plan drilling positions and visual spacing on cabinet doors and drawers.
The knob uses white marble with a champagne bronze finish, combining a stone body and warm metal tone that supports finish coordination in kitchens, baths, and built-ins.
The knob is fastened using #8-32 truss head screws, aligning with common cabinet knob thread standards so shop crews can work with familiar drilling and threading practices.
Product data specifies one #8-32 x 1 inch truss head screw and one #8-32 x 1-1/2 inch truss head screw, giving options to match typical cabinet and drawer front thickness ranges.
The B077044MW-CBZ manufacturer part number identifies this specific Firenze T-knob configuration, helping specifiers and buyers call out the exact white marble and champagne bronze model.
The knob falls under decorative hardware and moldings in the knobs class, signaling that it functions as visible cabinet hardware in design schedules and takeoffs.
The Firenze Collection T-Knob 5 Inch x 1 Inch white marble with champagne bronze B077044MW-CBZ offers a defined T-grip, stone body, and #8-32 truss head screw interface that align with cabinet hardware practice. For projects calling for white marble and champagne bronze coordination within a decorative hardware program, this Belwith Keeler Firenze knob provides a clearly specified option that ties grip feel, finish, and part identification into one repeatable choice.