Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Quickscrews #6 x 5/8-inch flat head hinge and drawer slide installation screw is built for mounting European cup hinges, drawer slides, and cabinet hardware to panels where screw penetration depth is limited. Packed 1,000 to the box, it keeps busy installation workflows supplied without frequent restocking.
European cup hinges and side-mount drawer slides attach to the cabinet box through pre-bored or pre-punched holes in their mounting plates. The #6 gauge matches the hole diameter in most standard hardware mounting plates, and the flat head seats cleanly in the plate countersink rather than standing proud above it. The 5/8-inch length drives fully into the panel without risk of breakthrough on thinner 1/2-inch or 5/8-inch box sides common in frameless cabinetry and ready-to-assemble cabinet systems. This makes the screw a practical fit wherever the panel thickness limits how deep the fastener can go.
The nickel finish on this screw reads as a cool, light metallic tone that blends naturally alongside chrome drawer slides, satin nickel hinges, and similar hardware finishes. In open-interior cabinetry or anywhere the installed hardware is visible, matching the screw finish to the hardware finish produces a more finished result. The coarse thread and sharp point are calibrated for the wood-based panel materials typical of cabinet box construction, where fast thread engagement and secure pull-out resistance in particleboard and plywood matter more than fine-thread precision.
Cabinet installers and shop teams who run European hinge and drawer slide hardware at volume will get the most out of this screw. The 1,000-piece box size suits production environments where running out mid-job costs time. The 5/8-inch length is the right call when the cabinet box sides are thinner than 3/4 inch, when hardware backing plates sit close to the panel face, or when the mounting clip geometry leaves limited thread engagement depth. Homeowners retrofitting a few hinges on thinner doors will also find the length and gauge appropriate for most standard European hinge plates.
A screw that is too long risks punching through the visible face of a thin panel. The 5/8-inch length provides enough thread engagement to hold hardware securely while staying safely within panels as thin as 1/2 inch.
Yes. The 5/8-inch length is well suited to thinner panel construction common in frameless and RTA cabinet systems, where a standard 3/4-inch screw can penetrate too deeply.
The flat head is designed to seat in the countersunk holes of standard hinge and drawer slide mounting plates, leaving the head flush with or slightly below the plate surface.
The nickel finish provides a visual match with chrome and nickel hardware finishes. It is appropriate for dry interior cabinet applications. It is not rated for exterior or high-humidity environments.
A #2 Phillips bit. That is the standard size for #6 gauge screws and the most common bit already in use during cabinet hardware installation.
Choosing the correct length for hinge and slide installation is straightforward once the panel thickness is known. This 5/8-inch screw gives installers and cabinet shops a reliable fastener for thinner panels, ensures hardware seats correctly, and comes in a box size that keeps the job moving from the first cabinet to the last.
Sold In: 1 Package