Schaub Pub House backplate describes a backplate designed to sit behind a pull, so it visually frames the handle and defines the contact area between the pull and the cabinet or drawer front. This part is identified as a backplate for pull, which means it is made to work as the flat decorative and protective surface at the base of a handle, giving a finished look around the pull footprint. The 3-1/2 inch center-to-center measurement tells you the hole spacing across the backplate, so it lines up with pulls that share the same 3-1/2 inch center-to-center layout. That fixed spacing helps keep drilling layouts consistent from front to front when you are repeating the same hole pattern. The Signature Satin Brass finish defines the visible surface color and sheen, so it coordinates with matching Signature Satin Brass pulls on the same project.
The stated 3-1/2 inch center-to-center size means the backplate is configured for pulls with 3-1/2 inch hole spacing, so the mounting holes on the door or drawer front align across both parts. Using this defined center-to-center dimension lets you repeat the same drilling pattern from cabinet to cabinet when you are laying out a run of pulls with matching backplates. Because the backplate is identified specifically as a backplate for pull, it is intended to sit directly between the pull and the cabinet surface, so the finished assembly uses the same hole pattern while adding the backplate as a visual base.
This Pub House backplate for pull is specified as a backplate for use under a pull, so it is applied directly behind the handle on a cabinet door or drawer front. The 3-1/2 inch center-to-center measurement sets its role in layouts that already use, or will use, pulls drilled on the same 3-1/2 inch center-to-center spacing, so it naturally fits projects using that drilling standard. Being a Signature Satin Brass backplate means it visually belongs in installations where other Signature Satin Brass decorative hardware is present, so it helps create a consistent color and finish story across the fronts. Because it is classed within decorative hardware and moldings as a backplate, it functions primarily as a visual and surface detail rather than a separate operating component.
The defined 3-1/2 inch center-to-center size on this Schaub 5103B-SSB backplate directly supports repeatable pull alignment because it locks the distance between mounting points, so each backplate and pull set shares identical spacing. Using a backplate for pull that matches the pull center-to-center dimension helps keep the handle centered over the backplate, which contributes to straight sightlines down a bank of doors or drawers. The Signature Satin Brass finish on the backplate keeps the visible surface consistent anywhere the backplate is used with Signature Satin Brass pulls, so mixed runs of cabinets maintain a unified appearance even as cabinet sizes change. Because the part is identified with a specific manufacturer part number, 5103B-SSB, it can be referenced directly during planning or reorders so the same finish and center-to-center spacing are repeated on future work.
The 5103B-SSB part is a Schaub Pub House backplate for pull, so it serves as the decorative base plate positioned behind a cabinet or drawer pull.
This backplate is specified at 3-1/2 inch center-to-center, so it matches pulls that use the same 3-1/2 inch hole spacing in cabinet and drawer fronts.
This Schaub Pub House backplate has a Signature Satin Brass finish, so its color and sheen coordinate with other Signature Satin Brass decorative hardware.
The 3-1/2 inch center-to-center dimension sets a fixed hole spacing, so drilling and pull placement can follow the same pattern across multiple cabinet fronts.
This backplate is used under a pull on cabinet doors or drawers, so it provides a defined decorative base where the pull meets the front surface.
This Signature Satin Brass backplate is manufactured by Schaub and Company, placing it within their decorative hardware and moldings line.
This Schaub Pub House backplate for pull in Signature Satin Brass offers a defined 3-1/2 inch center-to-center layout, so it works with pulls drilled on the same spacing while providing a coordinated brass base. For projects that rely on consistent hole patterns and a unified Signature Satin Brass hardware look, this 5103B-SSB backplate lets you tie pull placement and finish together under a single specified part number.