Schaub Menlo Park Pull 6 CC identifies this pull as a Menlo Park series handle from Schaub and Company with a 6 inch center-to-center layout, so installers get a known, repeatable hole spacing for cabinet and drawer layouts. The matte black finish defines the pullâs visual presence, giving casework and fronts a dark, uniform tone that works well when a clean, modern contrast is needed against lighter materials. As a decorative handle in the Schaub product class for handles and pulls, it serves both as a working grip and a visible design element on finished woodworking projects. The 6 inch center-to-center description ties directly to drilling jigs and templates commonly used in the shop, helping maintain consistent spacing across multiple fronts. By using a branded Schaub and Company pull, shops align this handle with other decorative hardware and moldings specified in the same line.
The 6 inch center-to-center layout on this Menlo Park pull defines the exact spread between the two mounting holes, giving installers a fixed measurement for drilling through cabinet doors and drawer fronts. This spacing works cleanly with layout rules where pulls are aligned horizontally near the edge of doors or centered on drawer faces, so crews can rely on a single measurement when setting jigs. The #8-32 thread size listed in the web description describes the internal threading of the pull, so it pairs with standard #8-32 fasteners commonly used in cabinet hardware. That thread detail reduces trial fitting on site because the pull is already matched to a known thread pattern for fastening through wood substrates or similar materials.
This product is identified as a pull in matte black with a 6 inch center-to-center dimension, so it fits naturally on cabinet doors and drawer fronts where a longer handle length is desired for grip and proportion. As part of the decorative hardware and moldings category for handles and pulls, it is intended for finished woodworking applications rather than rough construction, making it suitable for cabinet shops, millwork, and similar trades that focus on visible surfaces. The Schaub and Company branding places it within a recognizable hardware line, which helps designers and builders coordinate this handle with other Schaub decorative hardware on the same project. The Menlo Park naming and manufacturer part number 537-MB give specifiers a clear reference point on drawings and hardware schedules, so the same pull can be called out across multiple rooms or units without ambiguity.
The 6 inch center-to-center dimension on the Schaub 537-MB pull directly affects drilling, because that measurement defines the hole spacing the installer will cut into doors or drawer fronts. When multiple cabinets use this same pull, that consistent 6 inch spacing helps maintain an even visual line across banks of drawers or tall doors, reducing layout variation from piece to piece. The #8-32 thread specification further ties the handle to a common hardware standard, so fabricators can plan for through-fastening using #8-32 machine screws as part of their normal cabinet workflow. Having both the center-to-center dimension and thread size clearly defined in the web description simplifies shop setup, because jigs, drilling patterns, and fastener bins can all be matched to this pull before parts reach the installation stage. The combination of Menlo Park styling, matte black finish, and clearly stated mounting details makes this pull straightforward to specify and repeat on production cabinet runs.
The Schaub Menlo Park Pull uses a 6 inch center-to-center spacing, meaning the distance between the two mounting holes is 6 inches, guiding drilling and layout on doors or drawer fronts.
The matte black finish on this pull provides a dark, non-gloss tone that visually anchors lighter cabinet faces or coordinates with other black decorative hardware on a project.
This Menlo Park pull is specified with a #8-32 thread, so it works with #8-32 fasteners commonly used in cabinet hardware for through-bolting doors and drawers.
The 537-MB pull is manufactured by Schaub and Company, placing it within the Schaub decorative hardware line distributed by Wurth Baer Supply.
This product is categorized as decorative hardware handles and pulls, indicating it is intended for finished cabinetry, drawers, and similar woodworking installations.
The manufacturer part number 537-MB uniquely identifies this Schaub Menlo Park Pull, simplifying specification, ordering, and repeat use across multiple jobs.
The Schaub Menlo Park Pull, 6 inch center-to-center, matte black, with #8-32 thread and part number 537-MB, gives shops a clearly defined handle for decorative cabinet work. With its stated center-to-center spacing and thread standard, it ties directly into common drilling layouts and fastening methods used in cabinet production. For projects calling for a matte black pull from the Schaub and Company line, this model offers a specific, repeatable choice that aligns with decorative hardware and moldings standards handled through Wurth Baer Supply.