
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Adjustable leg kit gives cabinet and furniture installers a way to bring work surfaces and bases into height using one consistent hardware solution. The 92.5mm - 150mm adjustment range allows the same kit to handle low and higher plinth heights, which simplifies planning across a project with mixed cabinet sizes.
The Titus Tool brand on this 92.5mm - 150mm adjustable leg kit signals that the components are designed specifically for cabinet and furniture levelers, so they match common shop workflows for casework, toe kicks, and work tables. The black finish lets the leg hardware sit back visually under cabinets and work surfaces, so exposed areas around toe kicks or open bases stay visually clean on finished installations.
The SAP description as a cabinet leveler screw fix black 4/set defines this kit as a screw-fixed cabinet leveler solution, which means the legs are fastened directly to the cabinet or base structure to give a secure connection that resists movement when cabinets are loaded in service.
The description cabinet leveler screw fix black identifies this adjustable leg kit as a screw-mounted system, so each leg is anchored to the cabinet or furniture carcass using a screw connection that resists shifting once the final height is set. The 92.5mm - 150mm range allows the installer to dial in height by turning the leveling component within that span, so bases can be brought into plane across uneven floors.
Because this product sits in the work surface and tables plus cabinet/furniture levelers category, it is positioned for mounting under cabinets, work tables, or similar structures where a stable, adjustable support point is needed during install and later service.
This Titus Tool 92.5mm - 150mm adjustable leg kit belongs in cabinet and furniture leveler applications, so it works under cabinets, toe kick assemblies, or work surfaces that require height adjustment. Being part of the work surface and tables plus cabinet/furniture levelers category, it aligns naturally with shop-built casework, utility cabinets, and table-style structures that rely on adjustable legs for final leveling.
The black finish allows the legs to sit under cabinets without drawing attention, which is useful around recessed toe kicks or open bases where the underside might be visible during normal use. The 4/set structure matches a typical four-corner layout on many cabinets and small work tables, so each corner can be supported by one leg from the same set, keeping the adjustment behavior consistent on all support points and helping the cabinet sit correctly in its final position.
The defined 92.5mm - 150mm adjustment range means this cabinet leveler provides over 50mm of vertical travel, giving installers room to compensate when floor conditions vary from one end of a run to the other. By working within a known range, layouts around toe kicks and finished panel heights can be planned so that the leg setting falls near the middle of the travel, leaving room for fine tuning during installation.
This range also lets one Titus Tool adjustable leg kit standardize height adjustment across different cabinet or work surface designs that share similar plinth or base heights, which streamlines repetitive setups in commercial millwork or shop-built furniture runs. As the SAP description states cabinet leveler screw fix black 4/set, installers know they are working with a screw-fixed leg design and a four-piece kit, so they can plan corner support and interior support points around that format while keeping all adjustments within the 92.5mm to 150mm operating band.
The 92.5mm - 150mm adjustable leg kit covers that full range, allowing cabinet and furniture bases to be set within those heights to match toe kicks or work surface requirements.
This product is described as a cabinet leveler screw fix, so the leg components are fastened to the cabinet or base structure using screws for a fixed mounting connection.
This Titus Tool adjustable leg kit is listed under work surface and tables plus cabinet/furniture levelers, so it suits cabinets, furniture bases, and work tables needing adjustable height support.
The black finish keeps the cabinet leveler visually subdued under cabinets or tables, which helps finished toe kicks and open bases look clean in everyday use.
The SAP description states 4/set, so this adjustable leg kit provides four cabinet leveler legs that can be placed at cabinet or table corners for support.
Part number 002609.835.550 identifies this specific Titus Tool adjustable leg kit configuration, which helps align ordering with the 92.5mm - 150mm screw fix black 4/set description.
This Titus Tool adjustable leg kit, identified as a 92.5mm - 150mm cabinet leveler screw fix black 4/set, offers a defined height range and screw-fixed mounting for cabinet and furniture bases. The 4/set configuration supports typical four-point layouts under cabinets and small work surfaces.
For projects that call for cabinet and furniture levelers within the 92.5mm - 150mm band, this black Titus Tool leg kit from Wurth Baer Supply gives a single, repeatable solution you can apply across cabinets, toe kick bases, and work tables that share similar base heights.
Sold In: 1 Set