Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Straight Mortising Bit 1/4 in from Kreg Tool is a straight router bit designed for grooves, dadoes, and edge-routing applications, so it handles common joinery and trim passes on cabinets, fixtures, and built-ins. The 1/4-in cutting diameter defines the width of the groove or dado, which helps keep layout predictable when matching mating parts. Its 1/4-in shank fits compact routers that accept this size, so it works well for lighter, controlled passes on site or in the shop. Premium carbide-tips provide long-lasting sharpness and durability, which reduces resharpening downtime over repeated jobs. A 24,000 max RPM rating supports typical router and router table speeds, giving you the flexibility to match bit speed to material and cut. The bit delivers clean, precise cuts in plywood, hardwood, and MDF, which supports tight joints and reduces sanding around routed areas.
The 1/4-in shank of this KRTCG150 straight mortising bit is sized for routers that accept 1/4-in shank tooling, so it fits compact routers commonly used for on-site trimming and light joinery. The bit works with router tables or handheld routers, allowing you to choose a stable table setup for repeatable grooves or a handheld pass for longer runs and edge-routing. Its 24,000 max RPM rating aligns with typical variable-speed router settings, giving flexibility to tune speed to material and cut depth. Because the cutting diameter is 1/4 in, the slot or groove it produces matches many small hardware and spline applications where a narrow, consistent channel is needed.
This straight mortising bit is ideal for grooves, dadoes, and edge-routing applications, so it suits tasks like cutting narrow dados in cabinet sides or routing decorative edges on shelving. Its ability to deliver clean, precise cuts in plywood means sheet-good casework can be machined with joints that fit without excessive cleanup. Performance in hardwood supports use on solid-wood frames and trim, keeping routed profiles sharp along the grain. Reliable cutting in MDF helps when machining painted components or shop fixtures where a smooth routed surface is important. With a 1/4-in cutting diameter, it produces narrow slots that align with small-scale joinery and detail work, keeping waste minimal while still providing a defined channel.
The combination of a 1/4-in cutting diameter and 1/4-in shank keeps the bit proportioned for compact routers, which can aid in control when following edges or guide fences on smaller workpieces. Premium carbide-tips provide long-lasting sharpness and durability, so the cutting edges stay effective over multiple passes, helping maintain uniform groove depth and wall quality from the first part to the last. The 24,000 max RPM rating corresponds to speeds commonly used for straight bits in router tables or handheld tools, supporting smooth chip removal and reducing burning when matched to the material. Because the bit works with router tables or handheld routers, a single profile can handle both controlled, jig-guided dado work on a table and freehand edge-routing on assembled pieces, which can streamline setups across a project.
This straight mortising bit delivers clean, precise cuts in plywood, hardwood, and MDF, which supports use across common cabinet, furniture, and fixture materials in a typical woodworking shop.
This bit has a 1/4-in cutting diameter, so it cuts grooves or dadoes that are 1/4 in wide, which helps with consistent, narrow joinery and layout planning.
The 1/4-in shank is sized for routers that accept 1/4-in shank bits, which aligns well with many compact routers used for lighter routing and detail work.
This bit works with router tables or handheld routers, so it can be run in a table for controlled grooves or used handheld for edge-routing tasks.
The 24,000 max RPM rating matches typical router speed ranges, so the bit operates within common settings while maintaining control over cut quality.
Premium carbide-tips provide long-lasting sharpness and durability, supporting smoother cuts over time and reducing interruptions to change or service the bit.
This Straight Mortising Bit 1/4 in from Kreg Tool offers a 1/4-in cutting diameter, 1/4-in shank, and premium carbide-tips, so it supports precise grooves, dadoes, and edge-routing in plywood, hardwood, and MDF. The 24,000 max RPM rating and suitability for router tables or handheld routers provide flexibility across different routing setups. For projects that call for narrow, accurate channels with clean walls, this KRTCG150 router bit gives a defined profile that fits compact routers and routine cabinet or fixture work.
Sold In: 1 Each