Edgeband Clamp Max Opening 2 inch describes a Kreg Tool clamping solution built specifically for holding edgebanding and trim while glue sets, so installers and woodworkers can keep narrow pieces locked in place instead of fighting shifting stock. The stretchable band securely grips edgebanding and adapts to any profile, which lets you work along straight, curved, or shaped edges without juggling different clamp styles for each contour. Pivoting jaws ensure full contact for a strong hold on various material thicknesses, so the clamping pressure stays where the glue line is instead of riding up on the edge. Non-marring GripMaxx pads hold firm without damaging surfaces, which protects finished panels, prefinished parts, or delicate veneers during clamping pressure. The clamp provides a max jaw opening of 2 inches, giving enough range to handle common workpiece and trim combinations in cabinet, furniture, and shop projects.
The max jaw opening of 2 inches provides room to engage the clamp around typical workpiece edges and attached trim, giving enough travel to pull parts together at the glue line. A throat depth of 1-1/2 inches with the band removed reaches in from the edge to hold material away from the very outside corner, which is useful when working on narrower frames and small project parts. The max capacity is edgebanding or trim up to 1 inch thick to a workpiece width up to 2 inches, defining the working range so sizing choices stay within what the clamp is designed to secure. The band is easy to apply with one hand, letting users tighten the clamp while stabilizing the panel or edging with the other hand. Glue-resistant band and clamp pads further support repeat clamping by helping the surfaces release from dried adhesive.
This Kreg Tool edgeband clamp, classified under woodworking hand clamps, is built for holding edgebanding and trim against a workpiece during gluing, so cabinetmakers and shop users can secure narrow strips without elaborate jigs. The stretchable band securely grips edgebanding and adapts to any profile, helping on jobs that move from straight panel edges to curved shelves or shaped tops without changing tools. Pivoting jaws ensure full contact on various material thicknesses, which supports work across different panel builds and trim sizes in the same shop. The max capacity of edgebanding or trim up to 1 inch thick to a workpiece width up to 2 inches defines its role around edges, rails, and narrow components where traditional bar clamps feel oversized. A throat depth of 1-1/2 inches with the band removed positions holding pressure slightly inboard from the edge, suitable for small parts and face frames.
The Glue-resistant band and clamp pads play directly into daily workflow by limiting adhesive buildup, helping the clamp release cleanly so it is ready for the next setup. Non-marring GripMaxx pads hold firm without damaging surfaces, which matters when edging prefinished panels or laminates where surface quality must stay intact after clamping. The easy-to-apply one-hand operation allows the user to maintain control of the workpiece during band tensioning, reducing fuss during alignment at the glue joint. The removable band expands the tool into additional clamping applications beyond edgebanding, so the same KEBC100 part number serves small holding tasks when only the jaws are needed. The 2 inch max jaw opening sets a clear upper limit for the combined workpiece and edging, guiding users toward situations where this compact clamp provides secure pressure instead of relying on larger general-purpose clamps.
The KEBC100 clamp handles edgebanding or trim up to 1 inch thick on a workpiece width up to 2 inches, matching common cabinet and furniture edging dimensions.
The stretchable band securely grips edgebanding and adapts to any profile, so it maintains pressure along straight, curved, or profiled edges without swapping clamps.
The pivoting jaws ensure full contact across various material thicknesses, helping deliver even clamping pressure directly at the glue line for more consistent bonds.
The glue-resistant band and clamp pads reduce adhesive buildup on the clamp, so it releases more easily from dried glue and remains ready for repetitive clamping tasks.
The non-marring GripMaxx pads hold firm without damaging surfaces, supporting use on painted, laminated, or prefinished components during edgebanding and trim work.
The removable band allows the clamp jaws to work alone, providing a compact clamping option where band-style pressure is unnecessary but edge holding is still required.
The Kreg Tool KEBC100 Edgeband Clamp, with a max jaw opening of 2 inches and capacity for edgebanding or trim up to 1 inch thick, gives shops a focused way to hold edging tight at the glue line. Its stretchable band adapts to any profile, while pivoting jaws and non-marring GripMaxx pads maintain full, surface-safe contact on various material thicknesses. Glue-resistant band and pads and an easy one-hand application support repetitive cabinet, furniture, and trim projects where steady pressure along edges saves time and rework.
Sold In: 1 Set