
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
PowerSync wired controller double door sensor from Tresco Lighting is a nickel finish LED lighting accessory designed to control Tresco 12/24VDC single color dimmable low voltage lights. It operates with both 12VDC and 24VDC systems, so one sensor can be used across different Tresco low voltage runs. The unit is built as a double door sensor, so it responds to door position to manage lighting power. Its door open, light on; door closed, light off function automates cabinet or compartment lighting based on door movement, which reduces manual switching steps during installation and use. The sensor design uses an 8mm diameter hole for recess mounting, which helps create a clean look in millwork where a flush fit is preferred. A nickel finish presents a neutral, professional appearance that coordinates with typical cabinet and fixture hardware.
This Tresco double door sensor functions as a wired controller in a 12/24VDC system, so it sits in line with the low voltage run feeding Tresco single color dimmable lights. The design uses a smaller form factor with an 8mm diameter hole for recess mounting, allowing the sensing component to sit inside drilled cabinet or panel stock. A nickel finish supports a clean look where the sensor face remains visible in the opening. An optional surface mount clip provides a surface installation route when drilling for recess mounting is not desired. The unit operates by monitoring door position and then switching power to the lights, using the door open, light on; door closed, light off behavior as its core control method.
This PowerSync wired controller double door sensor is specified as an LED lighting accessory for Tresco 12/24VDC single color dimmable low voltage lights, so it serves as a control point inside those low voltage lighting runs. It operates at 12VDC and 24VDC, making it suited to Tresco installations built around either common low voltage standard. Because it is a double door sensor with door open, light on; door closed, light off control, it works well in cabinet, closet, or compartment projects where doors define when lighting should operate. The smaller design with an 8mm diameter hole for recess mounting supports use in cabinet sides, tops, or fixed shelves where a concealed sensing location is desired. Its nickel finish visually coordinates with typical interior hardware, so the sensor can sit near hinges or frames without drawing attention. As an LED lighting accessory in the Tresco system, it becomes part of the engineered control path rather than a separate generic switch.
The 12VDC and 24VDC compatiable rating means the same sensor model can be wired into either 12VDC or 24VDC Tresco single color dimmable low voltage lights, which supports standardizing on one control component across projects. Its role controlling all Tresco 12/24VDC single color dimmable low voltage lights gives installers one door-activated method for those lights, helping create uniform behavior across cabinets outfitted with different Tresco fixtures. The door open, light on; door closed, light off operation turns door movement into a predictable trigger, which simplifies explaining system behavior to end users. The smaller design and 8mm diameter recess mounting option keep the sensing point stable and fixed relative to the door, supporting repeatable alignment from job to job. Where recess mounting is less practical, the optional surface mount clip provides a consistent alternate mounting approach, keeping the sensor location controlled on the workpiece surface. The nickel finish maintains a finished look over time in typical interior woodworking environments, supporting professional presentation of the completed installation.
This Tresco door sensor controls Tresco 12/24VDC single color dimmable low voltage lights, so it serves as an on/off controller in those specific Tresco lighting runs.
The double door sensor uses door open, light on; door closed, light off behavior, so lighting automatically follows door position without a separate manual switch.
This sensor is compatiable with 12VDC and 24VDC, so it can be wired into Tresco low voltage lighting projects built around either voltage standard.
The Tresco door sensor uses a smaller design with an 8mm diameter hole for recess mounting, providing a flush, concealed installation point in cabinet material.
The PowerSync door sensor has a nickel finish, giving exposed portions a neutral metallic appearance that pairs well with typical cabinet hardware.
This unit functions as a wired controller in the Tresco low voltage system, switching power to compatible lights based on double door position.
This PowerSync wired controller double door sensor from Tresco Lighting offers door-based control for Tresco 12/24VDC single color dimmable low voltage lights, using door open, light on; door closed, light off operation. Its compatiable 12VDC and 24VDC rating suits a range of Tresco low voltage layouts. The smaller design with an 8mm recess mounting option and nickel finish supports clean cabinet integration. When planning Tresco lighting runs that call for automatic door-activated control, this double door sensor provides a purpose-built controller to match the system.
Sold In: 1 Each