Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dolken PVC edgebanding Tawny Port is PVC edge banding designed to finish exposed edges on panels, giving cabinet and furniture projects a coordinated Tawny Port appearance. This Doellken Woodtape edgebanding is built as a dedicated edge treatment, so it bridges the transition from raw panel material to a consistent finished look on doors, drawer fronts, and casework. The 15/16 inch width works across common panel thicknesses where a slight overhang is preferred for trimming, helping achieve a clean line after edge routing or flush trimming. The .018 inch thickness keeps the edge profile slim, which supports a subtle, furniture-style edge rather than a bulky band. The Tawny Port color tone allows edging to visually match surfaces specified in the same shade, supporting continuous color around cabinet and furniture components.
This edge banding uses a 15/16 inch width, giving you enough edge coverage on typical sheet-goods so the band overhangs slightly before trimming, which helps achieve a straight, seamless edge. With a .018 inch thickness, the material lays on the panel edge without adding a bulky lip, which supports tight reveals at doors, drawer fronts, and partitions. The PVC construction provides a manufactured edge material that behaves consistently as it is bonded and trimmed along square panel edges, helping installers work predictably across entire cabinet runs. The Tawny Port color tone is part of the visual specification, so the edge line can track the same finish choice used on matching components in a project.
This Doellken Woodtape PVC edge banding in Tawny Port is suited to panel-based cabinet and furniture work where a Tawny Port finish has been specified for visible surfaces. The 15/16 inch width aligns with common 3/4 inch panel applications that benefit from a touch of overhang, such as cabinet sides, bottoms, tops, and shelves that need clean front edges. On doors and drawer fronts made from panel stock, this width allows the band to cover the face edge fully before trimming, supporting straight, uniform lines across banks of fronts. The .018 inch thickness helps keep the edge profile visually light, which is useful when a modern, flat-panel look is desired without a pronounced rounded or bulky edge. In built-ins, casework, and similar millwork where the same Tawny Port tone is specified, this edgebanding maintains color continuity around exposed edges so the finished installation reads as a coordinated system.
The measured 15/16 inch by .018 inch sizing provides defined edge geometry, which aids in setting up trimming tools and workflows so multiple parts can be run with consistent results. Because the edgebanding is PVC, each length maintains uniform thickness along its run, supporting smooth router or trimmer passes without soft spots or abrupt transitions. The Tawny Port designation ties the edge material to a specific color tone, which supports repeat orders on future jobs where the same finish must be matched for add-ons, replacements, or field adjustments. The Doellken Woodtape branding identifies this as part of a dedicated edgebanding line, helping shops standardize on this material when they want the same Tawny Port edge look from job to job. The manufacturer part number 5720-1518-1 provides a precise reference for shop paperwork and reordering, so identical edgebanding can be specified whenever replacement panels or new cabinets are produced for an existing Tawny Port installation.
This edgebanding is 15/16 inch wide by .018 inch thick, which supports slight overhang for trimming and a low-profile finished edge on panel-based components.
The Dolken Tawny Port edgebanding is made from PVC, giving a consistent manufactured edge that supports predictable trimming and a uniform surface along cabinet parts.
This Doellken Woodtape PVC edgebanding is used on exposed panel edges in cabinetry, furniture, and casework where a Tawny Port color tone is specified.
The 15/16 inch width provides coverage past common panel faces, allowing overhang for flush trimming and helping produce straight, clean cabinet and furniture edges.
The .018 inch thickness keeps the edge slim, which supports a refined appearance and avoids a bulky profile on doors, drawer fronts, and shelves.
Manufacturer part number 5720-1518-1 identifies this specific Doellken Woodtape Tawny Port PVC edgebanding, helping shops reference and reorder the exact same edge material.
This Dolken PVC edgebanding Tawny Port from Doellken Woodtape brings a defined 15/16 inch by .018 inch PVC edge to projects that call for a Tawny Port finish, supporting consistent visual results across panels. By using a dedicated Tawny Port edge band with a known part number, 5720-1518-1, shops can align current work and future replacements to the same color and size. For cabinet, furniture, and casework production where the edge needs to match a Tawny Port specification, this PVC edgebanding offers a straightforward way to carry that finish cleanly around visible panel edges.
Sold In: 600 Lineal Ft