Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Domino Joiner DF 500 R delivers a corded 420 watt power consumption that drives the cutter with consistent output, which supports steady mortising performance on job after job. An idle engine speed of 25 500 RPM powers the cutter head fast enough to mill mortises efficiently, which helps maintain pace on cabinet, furniture, or trim runs. Tenons ranging from 4 x 20 mm to 10 x 50 mm match a broad range of joint sizes, so one joiner can handle small parts as well as larger frame components. Matching beech and weatherproof sipo material options support indoor or outdoor builds, letting you carry the same process from shop projects to exterior work. The oval-shaped DOMINO Tenon geometry creates twist-proof, rock-solid joints that hold tight, which matters when doors, rails, and panels are under everyday load.
The Domino Joiner DF 500 R uses routing depth presets at 12, 15, 20, 25, and 28 mm, giving defined mortise depths that pair with specific tenon lengths and panel thickness. These preset stops speed setup from one job to the next, because the lever positions directly reflect common build-ups instead of relying on manual measurement. Miter routing capability from 0 to 90 degrees allows mortises into angled joints, so installers can carry the same system into miters on frames and other non-square assemblies. Domino slot cutter diameters of 4, 5, 6, 8, and 10 mm tie cutter selection to the matching DOMINO Tenon size, which helps control side-to-side fit and keeps joint play within expectations. Corded power avoids battery charging cycles, supporting continuous bench or site work where sustained mortising is required.
The Domino Joiner DF 500 R with DOMINO Tenons ranging from 4 x 20 mm to 10 x 50 mm fits well in furniture, cabinet, and interior millwork where consistent mortise sizing is critical. Smaller tenons suit narrow rails and light frames, while longer options support wider stiles or thicker stock, so one machine can cover varied project scales. Beech tenons align with interior, conditioned environments, while weatherproof sipo tenons extend the same joinery method to outdoor builds that face moisture exposure. DOMINO connectors and fittings create strong yet demountable joints, which helps when pieces must pass through tight stairwells, be moved between sites, or be broken down for maintenance access. Miter routing from 0 to 90 degrees lets the system handle angled corners on frames and trim, tying those applications into the same mortise-and-tenon process.
The Domino Joiner DF 500 R uses routing depth presets at 12, 15, 20, 25, and 28 mm that match tenon sizes and panel thickness, so once a depth is selected, mortises repeat at that setting without recalculating each piece. Built-in indexing pins provide physical reference points that locate mortises repeatedly along an edge, supporting uniform spacing on cabinets or panel runs. The unique pendulum milling action produces smooth, accurate mortises with minimal effort, giving a refined surface for glue contact and a consistent pocket for each DOMINO Tenon. Slot cutter diameters of 4, 5, 6, 8, and 10 mm align the cutter to the chosen tenon, helping maintain predictable side clearance and joint strength. The oval-shaped DOMINO Tenon creates twist-proof joints that resist rotation under load, which is important for keeping doors, shelves, and structural elements square over time.
The Domino Joiner DF 500 R is a corded joiner in the Festool Domino system, designed to cut mortises for DOMINO Tenons so wood components can be joined with consistent alignment.
The Domino Joiner DF 500 R works with DOMINO Tenons from 4 x 20 mm to 10 x 50 mm and slot cutter diameters of 4, 5, 6, 8, and 10 mm, covering a range of joint sizes.
The Domino DF500R joiner uses routing depth stops at 12, 15, 20, 25, and 28 mm matched to tenon sizes and panel thickness, which speeds setup and helps keep mortises consistent across parts.
The Festool Domino joiner offers miter routing from 0 to 90 degrees, allowing mortises to be cut into angled joints so miters and non-square assemblies use the same joinery method.
The oval-shaped DOMINO Tenon creates twist-proof, rock-solid joints that hold tight, which helps doors, rails, and panels stay aligned under racking forces and repeated use.
The Domino Joiner DF 500 R uses 420 watt power consumption and an idle engine speed of 25 500 RPM, delivering fast cutter speed for efficient mortising in woodworking applications.
The Festool Domino Joiner DF 500 R pairs 420 watt corded power with an idle engine speed of 25 500 RPM, giving a fast-cutting platform for mortise work in cabinets, furniture, and millwork. DOMINO Tenons from 4 x 20 mm to 10 x 50 mm, in beech or weatherproof sipo, let installers match joint size and material to each job. Routing depth presets at 12, 15, 20, 25, and 28 mm, plus miter routing from 0 to 90 degrees, streamline setup across straight and angled joints. For shops and installers wanting twist-proof, rock-solid joinery that works from interior pieces to outdoor assemblies, this Domino system offers a consistent workflow.
Sold In: 1 Set