Kessebohmer 28 quart Champagne Trash Can, 10-1/2"W x 18"H x 10-1/2"D - 2507340103

Kessebohmer 28 Quart Champagne Trash Can Use

Kessebohmer 28 quart Champagne Trash Can is a replacement waste bin designed for Kessebohmer waste pullout frames, so it restores the functionality of an existing pullout system when the original bin needs changing. The 28 quart capacity gives a moderate volume for everyday kitchen or bath cabinet waste, which helps control trips to the main trash while keeping the pullout compact. Its champagne finish provides a coordinated appearance in Kessebohmer systems that specify this color, keeping the interior of the cabinet visually consistent when a bin is replaced. The manufacturer part number 2507340103 clearly identifies this specific bin in the Kessebohmer USA Inc line, which simplifies reordering for multiple jobs or matching existing installations. With a product class of Replacement Bins and Accessories, this bin is intended to fit into an already-installed Kessebohmer waste pullout frame so the installer focuses on swapping the container rather than changing the overall hardware.

Key Details Of This Replacement Trash Bin

• The bin is described as WASTE BIN ONLY, 28 QT-CHAMPAGNE, which defines it as a 28 quart replacement container that keeps capacity consistent with the original Kessebohmer setup on a service or remodel job.
• Designed for Kessebohmer Waste Pullout Frames means the bin is sized and shaped for those frames, allowing straightforward drop-in replacement where that frame is already installed.
• The champagne finish ties directly to systems that use this color, so replacing a worn or damaged bin maintains a uniform look inside the pullout cabinet section.
• The Kessebohmer USA Inc brand and manufacturer part number 2507340103 give clear sourcing, which matters when specifying exact parts for professional woodworking or cabinet contracts.
• The product is in the Trash Bins & Grommets category as a Replacement Bins and Accessories item, so it serves as a swap for an existing Kessebohmer waste pullout installation rather than a new hardware system.

Size Details For Fitting Into Existing Frames

The bin measures 10-1/2 inches wide, 18 inches high, and 10-1/2 inches deep, so it is shaped to sit in Kessebohmer waste pullout frames that are built around these dimensions. This consistent geometry helps the bin ride properly within the frame guides, keeping motion smooth when the pullout is opened and closed in a finished cabinet. The height of 18 inches provides vertical capacity within most base cabinets used for waste pullouts, helping balance usable volume with clearance under any framing or top structures in the cabinet interior. Matching width and depth at 10-1/2 inches create a relatively square footprint, which lets the bin nest securely in the Kessebohmer frame pocket without excess side-to-side movement during everyday use.

Using This Bin In Kessebohmer Pullout Installations

Where This Kessebohmer Replacement Bin Fits

This Kessebohmer 28 quart replacement bin is designed for Kessebohmer waste pullout frames, so its primary use is in cabinets already equipped with those frames. In a kitchen or bath cabinet that has a Kessebohmer waste pullout, the 10-1/2 inch by 10-1/2 inch footprint fits into the frame opening designed for this model, supporting stable bin positioning. The 18 inch height works with base cabinet interiors where the Kessebohmer frame is installed, allowing the bin to sit deep enough to hold 28 quarts while aligning with the frame's movement path. Because it belongs to the Replacement Bins and Accessories product class, this bin serves jobs where the existing pullout hardware remains in place and only the container is changed to refresh the system or match other champagne finish components.

Details That Support Consistent Pullout Performance

The 28 quart capacity defines the volume that the Kessebohmer waste pullout is set up to carry, so using this bin preserves the original load expectations and motion characteristics of the frame. The champagne finish aligns with the SAP description WASTE BIN ONLY, 28 QT-CHAMPAGNE, so visual continuity is maintained when a single bin in a multi-bin layout needs replacement. The manufacturer part number 2507340103 directly links this bin to documented Kessebohmer USA Inc waste solutions, helping installers match the correct component across multiple projects or service calls. Its classification in Trash Bins & Grommets under Replacement Bins and Accessories identifies its role in ongoing cabinet maintenance and upgrades, allowing woodworkers to standardize on this specific bin when servicing Kessebohmer waste pullout frames that require a champagne finish and this 28 quart format.

Practical Questions About This Kessebohmer Bin

Select This Bin For Kessebohmer Pullout Frames

The Kessebohmer 28 quart Champagne Trash Can offers a defined 10-1/2 inch by 18 inch by 10-1/2 inch size and 28 quart capacity designed for Kessebohmer waste pullout frames, so it aligns with existing hardware when a bin needs replacement. The champagne finish and specific manufacturer part number 2507340103 give clear visual and catalog identification, helping align new bins with installed Kessebohmer USA Inc systems. For projects that require maintaining frame performance while updating the container, this replacement bin provides the matched dimensions and stated color needed to keep the pullout operating and looking as originally specified.