PowerSync Wired Controller, Touch Controller, On/Off Only, Under Mount, White Finish

PowerSync Wired Controller For Low Voltage Lights

PowerSync wired controller from Tresco Lighting is a touch controller that turns low voltage lights on and off, giving straightforward control where a simple power toggle is all that is needed on jobs using compatible systems. The controller works with 12VDC and 24VDC systems, so one part number can serve across different Tresco single color dimmable low voltage lighting runs using those voltages. It is designed to control Tresco 12/24VDC single color dimmable low voltage lights, tying directly into that product family so the switching matches the lights it is specified with. An on/off-only touch surface keeps operation focused on basic power control, which suits applications where dimming is handled elsewhere in the circuit. White finish lets the controller sit discreetly under light-colored furniture or casework so it does not draw attention when mounted in visible under-surface locations.

Key Lighting Control Details That Help Installs

• The controller works with 12VDC and 24VDC systems, so installers can carry one device for multiple Tresco low voltage layouts that are wired to either voltage without changing the switching approach.
• Its design targets Tresco 12/24VDC single color dimmable low voltage lights, so the switching function pairs with that lighting group and keeps the control scheme consistent across those runs.
• The touch surface provides on/off-only control, giving a quick power cut or restore right at the furniture or cabinet line where the user interacts with the installation.
• Under mount orientation matches typical under-cabinet or under-shelf lighting layouts, allowing the controller to sit on the underside of furniture elements while remaining easy to reach.
• A 1 in. max furniture thickness rating defines the material thickness this controller is intended to work with, helping designers match it to panels and rails in that range.
• The controller uses a 3M adhesive back for mounting, which supports a surface-mount workflow where the unit is pressed into place rather than relying on mechanical fastening methods.

Under Mount Touch Controller Mounting Approach

This under mount touch controller uses a 3M adhesive back for mounting, so it is designed to bond directly to suitable surfaces on the underside of cabinets, shelves, or furniture components in a lighting run. That adhesive-based mount supports a straightforward installation step on finished casework because the controller is set in its final location without drilling through the mounting face for this part. A 1 in. max furniture thickness spec defines the furniture material thickness context for the controller, aligning it with common cabinet bottoms, valances, and light rails that fall within that dimension.

Using This Tresco Touch Controller In Projects

Where This Under Mount Lighting Switch Fits

This Tresco touch controller is built to control Tresco 12/24VDC single color dimmable low voltage lights, so it fits into projects already specified around that lighting family on 12VDC or 24VDC systems. Under mount orientation means it suits installations where the controller is placed on the underside of furniture pieces, supporting typical under-cabinet, under-shelf, or similar casework lighting layouts. The controller is part of the PowerSync wired controller line, placing it within a wired control approach where switching happens through a direct connection rather than wireless triggers, which matches many shop-standard wiring practices. With white finish, the controller aligns visually with light-colored casework or interiors, helping it blend into pale cabinet bottoms or furniture components in residential or commercial millwork environments.

Control Details That Support Consistent Results

The touch surface on this controller provides on/off-only control, so users get a simple tap interface that directly toggles power to the connected Tresco single color dimmable low voltage lights without adding extra adjustment steps. Because it is compatible with 12VDC and 24VDC systems, this controller lets the same basic touch action deliver consistent switching across different runs that use those standard low voltage levels. Its design centers on single color dimmable low voltage lights, so the control behavior is focused on powering that specific type of lighting rather than trying to handle multiple unrelated loads. The 1 in. max furniture thickness spec gives a clear design parameter for the furniture elements surrounding the controller, which supports repeatable placements in cabinet lines built around that thickness range for bottoms or rails. Using a 3M adhesive back for mounting gives installers a defined attachment method for this controller, so the switch position can be set with a press-on step that aligns with planned access points for the touch surface.

Common Questions About This Lighting Controller

Select This Controller For Tresco Low Voltage Runs

The PowerSync wired controller from Tresco Lighting offers on/off-only touch control for Tresco 12/24VDC single color dimmable low voltage lights, giving a targeted switch for that lighting group. Its under mount design and 3M adhesive back for mounting support straightforward placement along cabinet or furniture undersides where users expect a discrete touch point. With compatibility for both 12VDC and 24VDC systems and a 1 in. max furniture thickness context, this controller slots into many common low voltage cabinet lighting layouts focused on simple power toggling.