The Dotul Face Frame Cabinet Machine MT-108 is designed for cutting and drilling cabinet parts in a single operation.

• Parts are clamped in place during cutting to prevent defects
• Both left and right hand pocket drills operate independently to drill pocket holes while parts are cut to length
• Each pocket drill can drill 1, 2, or 4 pocket holes
• Easy movable fence allows you to select cutting lengths and widths, and to position proper pocket hole drilling
• Cuts parts up to 1-1/8 inch thick
• 3 HP cut-off motor (230/460V — customer must specify voltage)
• 1 HP pocket drill motors (230/460V)
• Requires 90 PSI compressed air (clean air recommended)