
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Water based Assembly Glue from Jowat Corporation is a white Jowacoll low viscosity wood glue that supports general wood assembly and lamination of HPL, so it serves both standard joinery and laminate bonding in one product. The moderate open time of 8-10 minutes gives working room for aligning parts, helping installers position components without rushing the clamp-up. An assembly time of 15-40 minutes keeps parts under pressure long enough for bonds to develop, which supports consistent joint strength across a run of parts. The 12,000 cps viscosity flows well into wood pores, allowing the glue to wet the surface and support full contact in tight joints. As a water based product, it suits shop environments already set up for water cleanup workflows. The general assembly designation aligns with everyday wood projects where dependable bonding across solid wood and HPL is required.
This assembly glue is specified for general wood assembly and lamination of HPL, so it fits common shop tasks like joining wood components and bonding laminate to suitable substrates. The moderate open time of 8-10 minutes keeps adhesive workable on the surfaces while parts are brought together, supporting clean assembly of pieces that take several minutes to stage. With an assembly time of 15-40 minutes, clamped parts remain under load during the early setting period, which supports bond formation across the full joint area. The low viscosity level of 12,000 cps supports penetration into wood pores, allowing the glue to wet the surface structure where strength is developed. The application temperature requirement of above 58 F defines the conditions where the glue is intended to perform, guiding when the product should be applied for predictable curing and handling.
This water based Assembly Glue, identified as Jowacoll low viscosity from Jowat Corporation, is described for general wood assembly, so it aligns with everyday woodworking joints such as frames, rails, and panel components where wood pieces are bonded edge-to-edge or face-to-face. Its suitability for lamination of HPL means it also fits shop operations that bond high pressure laminate to underlying materials, aligning with tasks that combine laminate surfaces with wood-based substrates. The white color suits visible glue lines on lighter woods or HPL edges where a lighter bond line is preferred. The general assembly wording and wood glue classification place this product in the core adhesive group for wood shops that handle both solid wood assembly and laminate bonding on the same production line.
The moderate open time of 8-10 minutes allows the glue to penetrate wood pores while giving an installer time to spread adhesive, align components, and set clamps, which is especially useful when assembling parts that cannot be closed immediately. The assembly time of 15-40 minutes defines how long joints should remain assembled under pressure, supporting consistent bond development across multiple clamps or complex frames that stay in the press or clamps for that window. A viscosity of 12,000 cps means the glue is low viscosity within wood glue ranges, helping it flow into surface grain and small gaps so the bond engages the wood structure instead of sitting only on the surface. The specified application temperature of above 58 F provides the operating condition where these times and flow characteristics are intended to apply, supporting repeatable results when the glue is used within that temperature range.
This assembly glue is described for general wood assembly and lamination of HPL, so it is intended for bonding wood components and attaching high pressure laminate in woodworking projects.
The 8-10 minute open time keeps the glue workable while it penetrates wood pores and parts are positioned, which helps when staging assemblies that need several minutes before clamping.
The 15-40 minute assembly time defines how long the glued joints remain assembled under pressure, supporting bond formation while the adhesive sets across the full joint area.
The 12,000 cps viscosity indicates a low viscosity wood glue that flows into wood pores yet remains in the joint, helping provide even coverage and contact for structural bonding.
This assembly glue has an application temperature requirement of above 58 F, defining the conditions where its open time, assembly time, and curing behavior are intended to perform.
This assembly glue is a Jowacoll low viscosity, white, water based wood glue from Jowat Corporation, aligning it with a dedicated adhesive manufacturer for woodworking and HPL work.
This water based Assembly Glue, listed as ASSEMBLY GLUE, GENERAL with manufacturer part number 10340-0045, ties directly to general wood assembly and lamination of HPL tasks in the shop. The combination of 8-10 minute open time and 15-40 minute assembly time supplies workable staging and clamping windows for typical wood joints and laminate layups. The 12,000 cps viscosity supports penetration into wood pores for structural bonding, while the above 58 F application temperature defines the environment where those properties are intended. For projects that blend wood assembly with HPL lamination, this Jowacoll low viscosity glue from Jowat Corporation provides a single adhesive option aligned to those specified conditions.
Sold In: 1 Each