Hickory Hardware Touch of Spring Vibra Pewter 1-1/4" (32 mm) Diameter Knob, P7301-VP

Hickory Hardware Touch Of Spring Knob Use

Hickory Hardware Touch of Spring knob gives cabinets or furniture a 1-1/4 inch diameter pull point that is easy to grasp during everyday use. The zinc die cast construction creates a solid-feeling knob that supports repeat opening and closing without flexing in the hand. The 1-1/4 inch projection places fingers away from the door or drawer surface, which helps reduce knuckle impact on the face when pulling. A base diameter of 3/8 inch defines a compact footprint, so the knob seats on narrow rails or stile faces without crowding neighboring details. The Touch of Spring collection identity helps match this knob with other pieces from the same family by style reference. The Vibra Pewter finish defines the surface color and appearance, letting installers coordinate this knob with hinges, slides, or other visible hardware finishes on the project.

Key Touch Of Spring Knob Details That Matter

• The 1-1/4 inch diameter face provides a consistent gripping area, which helps users get a firm pull on doors or drawers even when hands are wet or gloved.
• The 1-1/4 inch projection sets the knob off the surface enough to clear typical door and drawer fronts, which supports smooth operation on both framed and frameless cabinet layouts.
• The 3/8 inch base diameter concentrates contact at a small seating point, which helps the knob register cleanly on narrow rails or trim without overlapping edges.
• The Vibra Pewter finish establishes a pewter-toned look, which helps designers and installers coordinate this knob with other pewter-colored decorative hardware in the same space.
• The zinc die cast material forms a dense metal body, which supports consistent threads and mounting strength for the installed knob over long-term service.

Cabinet Knob Mounting And Fit Details

The Touch of Spring series knob uses an 8-32 screw size, which matches a common cabinet knob thread pattern for straightforward installation into standard bored fronts. The 1-1/4 inch length dimension on the screw aligns with typical 3/4 inch cabinet door and drawer front thicknesses, helping the threads engage fully in the zinc die cast knob body. The 1-1/4 inch knob projection sets the working distance from the front surface, which supports consistent alignment across banks of doors when multiple knobs are mounted at the same height. With a 1-1/4 inch width measurement, the knob reads visually balanced on many door and drawer sizes, supporting uniform sight lines through a kitchen, bath, or casework run.

Using The P7301-VP Knob In Real Projects

Where This Vibra Pewter Knob Performs Well

The P7301-VP Hickory Hardware Touch of Spring knob, with its 1-1/4 inch diameter, suits cabinet doors and drawers that need a defined handhold without overpowering narrow fronts. The 1-1/4 inch projection keeps fingers comfortably spaced from painted or stained surfaces, which helps reduce wear marks where hands contact the wood or laminate. The 3/8 inch base diameter lets the knob sit fully on slim rails or narrow drawer headers, providing a stable mounting point even when layout space is tight. Its Vibra Pewter finish supports use in projects calling for a pewter-toned decorative hardware theme, such as transitional kitchens or built-ins matching other pewter-finished components. The zinc die cast material supports this use by forming a solid metal knob body that suits repeated residential or light commercial cabinet cycles.

Details That Support Consistent Installation Results

The 8-32 screw size on this zinc die cast cabinet knob ties directly into a widespread cabinet industry standard, which simplifies drilling patterns and hardware planning across a job. The 1-1/4 inch screw length is sized to pass through typical 3/4 inch fronts and still engage the internal threads of the knob, supporting a secure attachment without excessive protrusion on the back side. Matching the 1-1/4 inch knob diameter with the same 1-1/4 inch projection creates a balanced profile, which helps installers line up multiple knobs in a row with a uniform look from any viewing angle. The defined base diameter of 3/8 inch provides a clear bearing circle against the surface, limiting rocking at the contact point when the knob is tightened. With its Touch of Spring collection label, the P7301-VP knob can be selected when a project already uses that design family, helping keep visual continuity across doors, drawers, and other coordinated hardware locations.

Common Questions About The P7301-VP Knob

Select The Touch Of Spring Knob For Your Job

The Hickory Hardware Touch of Spring knob in Vibra Pewter combines a 1-1/4 inch diameter grip, 1-1/4 inch projection, and 3/8 inch base into a compact, practical pull point for cabinets. Its zinc die cast construction and 8-32 mounting interface align with standard cabinet hardware practices, which supports straightforward layout across doors and drawers. With the P7301-VP part number and Touch of Spring collection designation, this knob can be specified confidently when a pewter-toned, coordinated decorative hardware solution is required on a woodworking or cabinet project.