
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Hickory Hardware Metropolis knob in satin nickel is a zinc die cast cabinet knob designed for functional, everyday use. The 1-3/4 inch length provides a substantial gripping surface, which helps when opening heavier cabinet or furniture doors. The 3/4 inch width creates an oval footprint that sits neatly on the door or drawer front, giving a defined contact area for consistent hand placement during repeated use. A 7/8 inch projection positions the hand away from the cabinet face, which reduces knuckle contact and helps protect finished surfaces from fingerprints around the pull point. The 1 inch center-to-center dimension between mounting points lets installers align this knob with common drilling patterns, which streamlines layout on runs of doors or drawers. The satin nickel finish presents a muted metallic look that works well in many cabinet environments where a neutral, modern appearance is preferred.
This Metropolis Series satin nickel knob uses a 1 inch center-to-center mounting layout, which gives installers a defined spacing when marking or drilling for the two attachment points. The 8-32 screw size reference ties the knob to a standard machine-thread interface, which matches a widely used pattern in cabinet construction. The 1-3/4 inch overall length works well on many cabinet door and drawer widths, which helps keep the knob centered while leaving consistent reveals to adjacent edges. Its 7/8 inch projection maintains clearance between the users hand and the cabinet face, which can reduce wear around the hardware location over time. With a 3/4 inch width, the oval footprint stays compact, which is useful when knobs are placed near door frames or other hardware where space is tight.
The P7524-SN oval knob from the Metropolis Collection is designed for use on cabinet doors and drawers, which makes it suitable for many woodworking and cabinetmaking projects. Its 1-3/4 inch length and 3/4 inch width keep the knob proportionate on standard residential cabinet fronts, which helps maintain balanced sightlines across a run of doors. The satin nickel finish coordinates with other satin nickel cabinet hardware, which supports a unified look when mixing knobs and pulls in the same room. With a 7/8 inch projection, the knob provides enough stand-off to work comfortably on deeper door profiles, which is helpful on applied moldings or thicker custom fronts. The zinc die cast construction gives it a metal body suited to typical interior cabinet environments, which matches common material expectations in decorative cabinet hardware.
The 1 inch center-to-center dimension on this Metropolis knob provides a fixed reference when laying out drilling templates, which helps maintain straight lines and even spacing across multiple cabinet fronts. The 1-3/4 inch overall length gives installers a predictable edge distance for positioning the knob on both doors and drawers, which reduces layout variation between units. Its 3/4 inch width keeps the oval profile narrow, which is useful when knobs must sit close to door frames, appliance panels, or adjacent hardware without crowding. The 7/8 inch projection establishes a consistent stand-off from the surface, which is important when aligning hardware depths along a bank of cabinets so each pull point sits at the same distance from the face. The satin nickel finish and zinc die cast material combination mirrors widely used cabinet knob construction, which simplifies matching this knob with other satin nickel pieces on the same job.
The P7524-SN knob measures 1-3/4 inches in length, 3/4 inch in width, and has a 7/8 inch projection, which sets the hand at a consistent distance from the cabinet face.
The 1 inch center to center spacing gives a defined drilling pattern for the two mounting points, which supports repeatable alignment across multiple doors and drawers.
The Metropolis Series P7524-SN knob is zinc die cast, which provides a metal construction suited to typical interior cabinet and furniture hardware applications.
The knob has a satin nickel finish, which delivers a muted metallic appearance that coordinates with other satin nickel cabinet hardware.
The P7524-SN knob is specified with 8-32 screw size, which aligns with a common machine-thread standard used in cabinet hardware installation.
The 7/8 inch projection holds the knob away from the surface, which allows fingers to wrap behind the knob and helps reduce contact with finished cabinet faces.
The Hickory Hardware Metropolis Series P7524-SN satin nickel knob combines a zinc die cast body, 1-3/4 inch by 3/4 inch oval profile, and 7/8 inch projection to support everyday cabinet operation. Its 1 inch center-to-center layout and 8-32 screw reference match common cabinet drilling and thread practices, which streamlines hardware layout on doors and drawers. When a satin nickel oval knob with these specific dimensions fits the design and drilling pattern, this part number provides a defined, repeatable choice for ongoing cabinet and woodworking projects.