
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Hickory Hardware Rainforest knob is a zinc die cast knob from the Rain Forest collection that gives cabinet doors and drawers a consistent look across a run, which helps finished jobs match the design intent on the plan. The Vibra Pewter finish on this knob sets a specific tone for the hardware line, so installers can tie it to hinges or pulls that share a similar finish on the same project. The knob has a stated diameter of 2-3/16 inches, so it fills more hand area on wider drawer fronts or tall doors and can be laid out predictably on full overlay work. A projection of 1 inch sets how far the knob stands off the face, which affects finger clearance when opening thicker doors and helps avoid knuckles dragging across painted or stained surfaces.
This zinc die cast knob uses a standard 8-32 screw size, which aligns with common cabinet drilling patterns and speeds up installation on shop-built or factory cabinets that already use 8-32 threads. The 1 inch projection sets the working clearance, which helps determine if the knob will operate comfortably on doors near walls, tall panels, or adjacent appliances without hands feeling cramped. With a 3/8 inch base diameter, the bearing area at the cabinet face is defined, so installers can plan hole locations without conflicting with narrow rails or decorative edge profiles.
The knob belongs to the Rain Forest collection, which positions it for use wherever that design line is specified across cabinetry in kitchens, baths, or built-ins. Its 2-3/16 inch diameter gives a substantial presence on wider drawers, so it can be used as a single pull point instead of installing multiple smaller knobs on a face. The 1-1/2 inch length across the visible face lets it sit comfortably on mid-size doors without crowding stile edges, which is helpful when door rail widths are limited. A 1 inch projection defines the reach away from the cabinet face, so this knob can be planned for tight alcoves where excessive projection could interfere with adjacent doors or trim. The Vibra Pewter finish sets a muted metallic tone, so it can be specified to work with other Vibra Pewter hardware on the same job for a coordinated look from room to room.
The stated screw size of 8-32 ties this knob directly to a widely used cabinet hardware thread, which simplifies reorders and replacement because installers and shops already stock 8-32 fasteners. With the projection clearly listed at 1 inch, designers can draft cabinet elevations knowing exactly how far the knob will stand out, which helps prevent interference with opposing doors, pull-out fronts, or nearby panels. The base diameter of 3/8 inch sets the footprint at the mounting point, so drilling layouts can be repeated consistently across doors and drawers without the base overlapping adjacent profiles or moldings. Being made from zinc die cast material, the knob body has a defined casting construction, which suits repetitive installations on multi-unit projects where the same knob model is used across many openings.
The Hickory Hardware Rainforest knob lists a diameter of 2-3/16 inches, which defines the face size and helps plan proportion on drawer fronts and doors.
The knob projection is stated at 1 inch, so it stands that distance off the cabinet face, setting finger clearance and impact spacing near walls or adjacent fronts.
The PA1512-VP knob uses an 8-32 screw size, matching a common cabinet hardware thread for straightforward mounting into standard bored holes.
The Rainforest collection knob is specified as zinc die cast, providing a cast metal body suitable for repeated use on typical cabinet doors and drawers.
This Belwith Keeler knob uses a Vibra Pewter finish, allowing it to coordinate visually with other Vibra Pewter hardware on the same installation.
The base diameter is 3/8 inch, defining the contact area on the cabinet face and guiding hole placement near edges or decorative profiles.
The Hickory Hardware Rainforest knob in Vibra Pewter combines a 2-3/16 inch diameter face, 1 inch projection, and 3/8 inch base to create a defined footprint on cabinet doors and drawers. With its zinc die cast construction and 8-32 screw size, this PA1512-VP knob lines up with common cabinet drilling and hardware standards. For projects calling for the Rain Forest collection and Vibra Pewter finish, this knob offers a consistent spec that can be repeated across kitchens, baths, and built-ins.
Sold In: 1 Each