Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Plywood Hardwood Stain Veneer Core is a States Industries plywood panel built with a two step layup process, so the inner plies are first laminated onto a blank and then overlaid with face and back veneers for a controlled, consistent build. This panel uses a western fir veneer core, giving it a plywood structure geared toward woodworking applications where veneer-core strength is preferred. The red oak face is plain sliced, so the veneer presents the characteristic cathedral grain pattern that many cabinet and furniture jobs require. The panel is unfinished, which leaves the red oak surface ready for your preferred stain system. With a listed thickness of 3/4 inch and nominal size of 48.5 x 96.5, the sheet dimensions align with common casework and panel layouts. The A-1 grade designation ties the red oak face and back to cabinet-grade appearance expectations.
This States Industries red oak plywood uses a veneer core construction, so tooling engages a wood-based core rather than a composite core during sawing and routing, which affects chip-out characteristics at the edges. The western fir veneer core supports fastening that depends on a layered wood structure, which is relevant when planning joinery that bears on the panel edges. With its 3/4 inch thickness, the panel fits common cabinet and furniture construction patterns that expect three-quarter stock for boxes, shelving, and structural partitions. The 48.5 x 96.5 overall size allows optimization of cut lists for full-height cabinets, tall panels, or multiple parts from a single sheet. The unfinished, plain sliced red oak surface accepts stain systems designed for oak, allowing color matching within red oak programs across a project.
This domestic oak, red, plain sliced panel aligns with applications where a recognizable red oak grain is part of the design, because the plain sliced cut presents cathedral and straight grain areas familiar in traditional casework. The A-1 grade designation ties the face and back to a high appearance standard, which is significant when the panel surfaces function as visible cabinet ends, door panels, or furniture sides. The veneer core built from western fir aligns with projects that rely on a plywood core structure rather than composite, supporting a wood-based feel at machined edges. With an unfinished surface, the red oak face is ready for stain or clear systems tailored to oak, which matters when coordinating color across face frames, doors, and trim that also use red oak. The nominal 48.5 x 96.5 dimension gives layout flexibility for full-height case sides, wide panels, or nested parts.
The two step layup process begins by laminating the inner plies onto a blank, so the structural core is established first, which supports predictable behavior when panels are cut into narrow strips or tall sides. During that core build, surface knots or slips in inner plies are puttied, so voids and loosened areas are addressed inside the panel, helping reduce weak spots that could show under veneer during sanding and finishing. The blank is then sanded before face and back veneers are applied, so high areas in the core are lowered ahead of veneering, which promotes consistent glue lines and helps the veneer lie flat during pressing. After veneering, this process is designed to ensure smoothness of the surface, so the red oak face starts from a uniform base that responds evenly to stain and clear coats. Consistency of the panel thickness is also supported by this build sequence, and that matters when running parts through automated machining, dado sets, or system boring patterns that expect stable stock thickness for joint fit and alignment.
This plywood uses a western fir veneer core, which provides a layered wood structure that interacts predictably with cutting tools and mechanical fastening along edges and faces.
The panel core is built and sanded before veneering, so the face and back go onto a smoothed blank, supporting a flatter, more uniform surface for machining and finishing.
Knots and slips in inner plies are puttied before sanding so voids are filled inside the panel, helping minimize telegraphing and soft spots under the red oak veneer.
The A-1 grade identifies this red oak plywood as a cabinet-grade product, tying the face and back veneers to a high visual standard for exposed woodworking applications.
The panel is unfinished, so the red oak face is ready for stain or clear systems formulated for oak, allowing color matching within red oak components on the same project.
This States Industries sheet lists a 3/4 inch thickness and 48.5 x 96.5 panel size, aligning with common layouts for cabinet cases, shelving, and larger furniture components.
This States Industries A-1 red oak veneer core panel combines a western fir veneer core with a two step layup process, so the inner plies, sanding, and red oak veneers work together for surface smoothness and thickness consistency. With its 3/4 inch thickness, 48.5 x 96.5 size, domestic red oak, plain sliced face, and unfinished surface, the sheet aligns with cabinet, furniture, and casework jobs built around red oak veneer. Use these verified details to match this plywood hardwood stain veneer core panel to red oak-focused projects that benefit from veneer core construction and a cabinet-grade A-1 appearance standard.
Sold In: 1 Sheet
