Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Spray Grade Contact Adhesive Non-Flammable is a Sta-Put solvent-based, non-flammable spray grade contact adhesive that bonds decorative laminate, wood products, and many other materials, so one product can handle typical laminate and woodworking bonding tasks. Because it is a contact adhesive in the bulk contact adhesives class, it is intended for projects where both surfaces are coated, allowed to dry, and then joined under pressure, which supports consistent bonding across sheet goods and panels. The adhesive exhibits high shear strength, so bonded parts resist sliding under load, which matters when vertical panels, doors, or tops need a stable bond under service stresses. Its UV stability means exposure to light does not quickly degrade the adhesive film, which helps bonded joints maintain integrity where assemblies encounter ambient light.
This Sta-Put contact adhesive is described as spray grade, which means the viscosity and formulation are designed to atomize through appropriate spray equipment, supporting even film builds across large laminate sheets and panel faces. The same product description specifies brush in the 5 GAL SPH OTC COMP NON-FLAM BRUSH CLR notation, indicating it can also be applied by brush, giving shops flexibility to use it in smaller areas, touch-ups, or where spray setups are not used. Fast drying behavior reduces idle time between coating the substrates and reaching bond-ready condition, which can speed sequences involving multiple panels or repeated runs. At the same time, the long open time referenced in the description means the adhesive film maintains bondability for an extended period, helping with staged assembly where several coated parts are brought together over time.
The Sta-Put Spray Grade Contact Adhesive Non-Flammable is positioned as a bulk contact adhesive in a 5-gallon format, which suits shops and installers who run ongoing laminate and wood bonding work rather than single small jobs. Its design to bond decorative laminate lets it serve in countertop skins, vertical panels, casework interiors, and doors where laminate faces must stay tight to the core. The ability to bond wood products broadens its use into assemblies like buildup strips, edge components, and panel laminations where a contact process fits the workflow. Because the adhesive offers heat and water resistance, it supports joints in areas that see warm conditions and incidental moisture, such as laminate countertops and general woodworking fixtures. UV stability adds value in installations exposed to ambient or natural light, supporting joints in open areas, near windows, or under shop lighting during fabrication.
The solvent-based, non-flammable spray grade design helps produce a controllable spray pattern, so applicators can lay down an even coat across both laminate and substrate, which is critical for uniform bond strength when the parts are joined. High shear strength means that once contact is made under pressure, the laminates and wood components resist being pulled out of alignment by their own weight or by minor loads, which helps maintain clean seams and tight edges over time. Fast drying behavior means adhesive films reach bond-ready condition quickly, enabling a steady production rhythm where panels can move from coating to assembly without long delays. Long open time keeps those dried films viable for bonding, giving crews flexibility to stage multiple parts and then bring them together when the workflow reaches that station. Heat and water resistance in the cured adhesive film supports service in everyday interior conditions where surfaces can warm up or encounter moisture. OTC compliant status ties the solvent system to applicable regulatory requirements, which supports ongoing use of this contact adhesive in regions where such compliance is necessary for daily operations.
The Sta-Put Spray Grade Contact Adhesive Non-Flammable is designed to bond decorative laminate, wood products, and many other materials, so it fits typical laminate and woodworking bond applications.
The non-flammable, solvent-based formulation lets shops use a contact adhesive without a flammable base, which supports work in environments governed by restrictions on flammable materials.
The high shear strength helps bonded parts resist sliding under load, which is important for vertical laminate panels, doors, and tops that must stay aligned in service.
Fast drying reduces waiting between coating and bonding, while long open time keeps the dried film bondable longer, which supports staged assembly and larger laminate layups.
Heat and water resistance allow the adhesive bond to perform in environments with temperature changes and moisture, supporting laminate and wood joints in everyday interior conditions.
OTC compliant status indicates the adhesive meets relevant solvent regulations, which matters for operations required to use products aligned with those air-quality standards.
The Sta-Put Spray Grade Contact Adhesive Non-Flammable in the SPH05LQC 5-gallon format offers a solvent-based, non-flammable contact bond for decorative laminate, wood products, and other materials, with high shear strength, UV stability, and resistance to heat and water. Its fast drying, long open time behavior, and OTC compliant status support production-oriented shops and installers who rely on a bulk contact adhesive that fits laminate and woodworking processes. For projects that match those bonded material needs and working conditions, this Sta-Put contact adhesive provides a focused option for handling ongoing laminate and wood bonding tasks.
Sold In: 1 Each
