Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune 2650-S is a stainless steel bar pull from the 26 Series, mounting on 7-9/16 inch (192 mm) centers and suited to wider drawers, tall doors, and cabinetry where a smaller pull would look undersized against the front.
The 7-9/16 inch center-to-center spacing is a step up from the common 5-1/16 inch and 6-5/16 inch patterns, which makes this pull the right scale for base cabinet drawers 24 inches and wider, for full-height pantry door fronts, and for furniture-scale cabinetry where the hardware needs to carry visual weight. It also suits kitchen islands and media cabinets where a narrower pull would read as an afterthought against a wide slab front. Because the 192 mm hole spacing is a recognized standard, it drops onto existing holes drilled to that pattern without modification.
The pull is constructed from stainless steel throughout, with the Stainless Steel finish reflecting the base material rather than a coating applied over a different substrate. The bar section is 9/16 inch wide, narrow enough to stay refined but substantial enough to feel solid in the hand. The finish reads as a cool, consistent silver tone under most lighting conditions and does not vary across the grip the way a plated surface can over time. For kitchens and baths already running stainless appliances or fixtures, this pull integrates without introducing a second metal.
This pull is a natural choice for cabinet shops specifying hardware on contemporary kitchens where stainless finishes run through the appliances and fixtures, and where wider drawers call for a longer pull to stay in proportion. Designers working on high-use environments appreciate stainless for its even wear behavior and its ability to coordinate with both warm and cool cabinetry tones. Contractors doing a full kitchen fit-out can specify this pull across drawer banks and pair it with a smaller 26 Series pull on narrower fronts, keeping the same profile and finish family throughout the job.
The 7-9/16 inch (192 mm) center-to-center is the distance between the two mounting holes, which is the number to match against existing holes or to mark for new drilling. The 10-1/16 inch (256 mm) overall length is the full end-to-end size of the pull, which determines how it looks on the front and whether it clears adjacent hardware.
Yes. At this center-to-center it works on wide drawer fronts and on tall or wide door fronts equally well. The grip and projection are the same either way.
The 26 Series spans several sizes, so you can match this pull's profile and finish across narrower and wider fronts in the same installation.
Stainless steel is a common choice in kitchens and baths where humidity and cleaning frequency are higher than in other rooms. The source data for this SKU does not include a specific environmental rating, so consult your project requirements for any specialty environments.
The 2650-S brings the 26 Series profile to the 192 mm spacing, giving wider cabinetry the same refined stainless bar as the smaller pulls in the family, at the scale those fronts actually call for.
