Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Camar 814-01-SX is a medium duty, 290 lb rated closet suspension bracket designed as part of a wall hanging rail system, so it supports substantial closet loads in typical residential or light commercial installations. The bracket is a left-hand version in white, which helps installers match handed layouts and color on closet runs where appearance and orientation both matter. As a suspension bracket in a wall hanging rail system, it supports rails so cabinets or closet components can be hung rather than floor-mounted, which frees up floor space and simplifies cleaning. This Camar 814-01-SX bracket is described as part of a group of suspension brackets offered in screw-on or 10mm dowel mounting styles, so it fits into projects where you either screw to the cabinet side or use dowel mounting holes already machined in the cabinet.
The Camar 814-01-SX suspension bracket works within a wall hanging rail system, so cabinet or closet units engage a rail rather than depending on direct screw fastening through the back. This changes installation into a lift-and-hang process, where the bracket interfaces with the rail and then uses precision vertical and horizontal adjustment. That precision vertical and horizontal adjustment in the suspension bracket allows incremental movement in both directions, so installers can raise, lower, or shift cabinets laterally to correct for wall irregularities or layout constraints. Because the bracket construction combines an all steel interior with a solid plastic outer casting, the load-bearing and adjustment components stay inside the steel structure while the plastic body presents a smooth surface at the cabinet side. The left-hand configuration in white helps keep rail engagement consistent between left and right corners while maintaining visual alignment with white cabinet interiors.
The Camar 814-01-SX suspension bracket is identified as a medium duty, 290 lb rated component for closet brackets and rails, so it suits wall-hung closet storage where a rail carries the cabinet weight. As part of a wall hanging rail system, this left-hand white bracket sits at the cabinet side to engage the rail, so it becomes the link between cabinet carcass and wall structure. The suspension role means the bracket is used in closet, shelf, or similar organizational installations instead of stand-alone shelving brackets, focusing on cabinets or modular units that hang. With its all steel interior and solid plastic outer casting, the bracket is suited to typical closet and cabinet environments where repeated opening, closing, and loading demands a robust internal mechanism paired with a clean outer surface. Being left-hand gives it a defined position in the layout, so it works in pairs with right-hand or unhanded units where the system design calls for it.
The Camar 814-01-SX suspension bracket incorporates precision vertical and horizontal adjustment, which provides fine control over cabinet positioning after the units are on the rail. Vertical adjustment lets installers raise or lower a cabinet relative to the rail, so door gaps and countertop lines can be aligned across multiple units without re-mounting. Horizontal adjustment allows slight side-to-side movement, which helps close small gaps or align stiles when cabinets or closet modules are butted together. The all steel interior paired with a solid plastic outer casting keeps the adjustment mechanism contained, so the moving hardware is supported by steel while the exterior remains smooth against the cabinet side. Because the design does not require cover caps, the visible portion stays as molded, which removes one more variable that could shift or interfere with precise alignment over time. In combination, these features support repeatable results across projects using this wall hanging rail system.
The Camar 814-01-SX is a medium duty suspension bracket for a wall hanging rail system, so it supports closet brackets and rails when cabinets or closet units are hung on a rail.
The Camar 814-01-SX suspension bracket is rated at 290 lb, so it is intended to handle substantial closet or cabinet loads within its medium duty range in typical storage installations.
The Camar 814-01-SX bracket provides precision vertical and horizontal adjustment, allowing cabinets on the rail to be shifted slightly up, down, or sideways to align doors, reveals, and joints.
The Camar 814-01-SX uses an all steel interior with a solid plastic outer casting, so the load and adjustment components sit in steel while the exterior presents a smooth finished surface.
The Camar 814-01-SX suspension bracket does not require cover caps because the solid plastic outer casting provides the finished look without extra trim pieces.
The suspension brackets in this Camar line are offered as unhanded, handed screw mount, and handed 10mm dowel mount versions, giving options for different cabinet construction methods.
The Camar 814-01-SX suspension bracket combines a 290 lb medium duty rating with a wall hanging rail system design, so it supports serious closet or cabinet loads while allowing rail-based installation. Its all steel interior and solid plastic outer casting remove the need for cover caps, which streamlines finishing steps and keeps the visible portion clean. With precision vertical and horizontal adjustment built into the bracket, installers can fine-tune cabinet position for tight alignment and consistent reveals after the units are on the wall. When a project calls for a left-hand white suspension bracket that works within a closet bracket and rail system, selecting the Camar 814-01-SX aligns the hardware with the intended load rating, adjustment capability, and visual finish.
Sold In: 100 Each