Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass TEC 872 self-close base plate describes how this hinge mounting plate works as part of the TEC 872 self-closing hinge system for cabinet doors. The product is identified as the Grass TEC 872 Self-Close 4mm Base Plate Nickel, Screw-On, which defines it as a screw-on hinge mounting plate with a 4mm plate height for use with TEC 872 hinges. Grass America branding identifies it as part of a professional hinge line, which matters when you need predictable interaction with matching Grass TEC 872 110 degree self-closing hinges. The SAP description stating 872-22 side mounting plate 1/2 inch overlay ties this base plate to cabinet doors designed for a 1/2 inch overlay, which directly affects how the door overlays the face frame or case side. The nickel finish on this base plate coordinates with the all metal, nickel-finished TEC hinge arm, presenting a consistent look wherever the hardware is visible.
The description explaining that Grass TEC 872 110 degree self-closing hinges use a pre-mounted soft-closing mechanism in the hinge cup clarifies that the base plate works with a hinge where damping is already handled in the cup, which keeps the plate focused on positioning rather than soft-close adjustments. The note that TEC hinges are available in a standard 45mm boring pattern matters because it ties the hinge cup layout to a common drilling pattern, so this base plate then locates the hinge arm in line with that pattern on the cabinet side. The instruction to use #6 x 5/8 inch flat head screws for base plates defines the intended screw size and head style, which supports secure mounting and proper seating of the screw heads in the base plate.
The product name stating Grass TEC 872 Self-Close 4mm Base Plate Nickel, Screw-On indicates that this plate is designed to pair with Grass TEC 872 self-closing hinges, which positions it for use on cabinets where controlled closing is desired. The SAP description describing it as a side mounting plate for 1/2 inch overlay places it on the cabinet side or similar mounting surface in 1/2 inch overlay configurations, which supports standard overlay door layouts frequently used in kitchen and bath cabinetry. The hinge description referencing TEC 872 110 degree self-closing hinges explains that these hinges provide a smooth and quiet closing action, so when used with the correct base plate, the cabinet door closes to the intended overlay position without slamming. The statement that the TEC hinges are three-dimensional hinges with three-dimensional adjustment means the hinge and base plate combination support adjustments in three axes, which matters when aligning doors across multiple openings.
The hinge description explaining a 3-way adjustable switch for soft-closing action shows that soft-close resistance and closing speed are tuned in the hinge cup instead of on the base plate, which keeps adjustment steps clearly separated between door-side and cabinet-side hardware. The mention of height adjustment capability through an elongated screw hole ties into how the hinge mounts to its base plate, which lets the installer move the door up or down slightly without remounting the plate. The description calling the TEC hinge a three-dimensional hinge demonstrates that the hinge and base plate relationship allows depth, side, and height tuning, which reduces rework when aligning doors to neighboring fronts and frames. The reference to minimal gap and protrusion when the door is closed shows that the hinge system, when mounted on the correct 4mm base plate, is designed to keep door-to-frame gaps small, which supports clean sightlines along a run of cabinets.
The Grass 43731-43 base plate is described as a Grass TEC 872 Self-Close 4mm Base Plate, so it is designed to work with Grass TEC 872 self-closing hinges on cabinet doors.
The SAP description calling this a 1/2 inch overlay side mounting plate means it is intended for 1/2 inch overlay doors, which sets how far the door overlaps the cabinet side or frame.
The product name labels it as Screw-On, so the base plate is fastened to the cabinet using screws, providing a direct mechanical mounting method on the cabinet surface.
The web description states to use #6 x 5/8 inch flat head screws for base plates, which guides the choice of screw size and head style for securing this plate.
The product name identifies a 4mm base plate, which fixes the hinge arm height at that level, forming the starting position for three-dimensional hinge adjustments on the door.
The nickel finish, called out in the product name, matches the nickel TEC hinges, giving a consistent appearance on cabinet interiors where hardware may be visible.
The identification of this product as a Grass TEC 872 Self-Close 4mm Base Plate Nickel, Screw-On with manufacturer part number 43731-43 gives a clear reference when specifying hardware for new cabinet jobs or replacements. The SAP description connecting it to 1/2 inch overlay side mounting use allows it to be chosen intentionally for overlay layouts that match TEC 872 110 degree self-closing hinges. The note that TEC hinges offer three-dimensional adjustment and an elongated screw hole for height tuning explains how this base plate becomes part of a system that supports precise, repeatable door alignment. For projects built around TEC 872 hinges and 1/2 inch overlay doors, selecting this specific base plate helps maintain consistent function and appearance across the installation.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1000 Each |  WW42300 Mfr# 3670000139961 1000 | Würth #6 x 5/8" Flat Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Zinc, 3670000139961 1000 - 1000/Box |
