Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Clip-on cam adjustable wing mounting plate describes a Salice America hinge mounting plate designed for use with Salice hinges. As a hinge mounting plate, it provides the interface between the cabinet and compatible Salice hinge arms, which matters when laying out consistent hinge positions across multiple doors. The plate is compatible with all Salice hinges Series F and Series B, so one plate style can serve both series in projects that mix these hinge types. The plate has a 0mm mounting height, giving a neutral base position that supports predictable overlay results. A wing mounting style creates a broader footprint on the cabinet, which can help distribute loads across the mounting surface. The plate is nickel plated and corrosion-resistant, so the surface stays protected in normal cabinet environments where moisture and handling can occur during installation and service.
This hinge mounting plate works as a base for Salice hinges Series F and Series B, so the same plate can be set out across a run of doors using these hinges. The 0mm mounting height establishes a baseline that pairs with the hinge arm geometry, which matters when targeting specific overlays in cabinet design. The standard 37 mm x 32 mm positioning defines drilling locations, allowing consistent setback and spacing along the cabinet side. Depth adjustment from -0.5 mm to +2.8 mm is handled through an eccentric cam, giving precise in-and-out door positioning after the plate is mounted. Height adjustment of plus or minus 2 mm through slotted holes allows small vertical shifts, which helps align door tops, bottoms, and reveals without relocating the plate.
This Salice America hinge mounting plate is identified as a clip-on plate, so compatible Salice hinge arms attach to it with a clip-on action. That connection style helps during door hanging because the plate can be mounted first, and the hinge arm can be clipped on when the door is ready. The 0mm height plate suits layouts where the hinge arm and door thickness determine overlay, letting installers repeat the same drilling pattern across cabinets. The standard 37 mm x 32 mm positioning gives defined reference distances from cabinet edges, so boring machines and jigs can be set to repeat the same pattern for every plate location.
The depth adjustment range of -0.5 mm to +2.8 mm, controlled by an eccentric cam, allows doors on Salice Series F and Series B hinges to be moved toward or away from the cabinet interior after mounting, which helps achieve even gaps and clean closing action. Because the cam is eccentric, small turns result in fine, repeatable movements, so adjustments are less likely to overshoot. The height adjustment of plus or minus 2 mm via slotted holes lets the plate shift along the cabinet side, bringing door tops and bottoms into alignment relative to adjacent fronts. Nickel-plated, corrosion-resistant construction supports those adjustable features over time by protecting moving and clamping areas from corrosion in typical cabinet environments.
This Salice America mounting plate is compatible with all Salice hinges Series F and Series B, so it serves as the cabinet-side base for those hinge families.
The 0mm mounting height means the plate does not add lift at the cabinet surface, so overlay and positioning are determined by the hinge arm and drilling layout.
Depth adjustment from -0.5 mm to +2.8 mm is provided by an eccentric cam, allowing controlled in-and-out movement of the door relative to the cabinet front.
This hinge mounting plate offers height adjustment of plus or minus 2 mm through slotted holes, so door alignment can be shifted up or down after mounting.
The plate uses a standard 37 mm x 32 mm positioning, giving fixed reference distances for boring machines and jigs during cabinet side preparation.
The nickel plated, corrosion-resistant finish helps the plate maintain function and appearance in cabinet interiors where humidity and handling are common.
The Salice America BAVGE09F/16 hinge mounting plate combines a 0mm height, cam depth adjustment, and slotted height adjustment, so installers can fine-tune doors on Salice Series F and Series B hinges. The clip-on design speeds hinge arm handling during installation and later service. A standard 37 mm x 32 mm positioning supports repeatable cabinet drilling setups. Nickel-plated, corrosion-resistant construction and a lifetime warranty support long-term hinge performance in cabinet projects.
Sold In: 1 Each