Berenson Euro Traditions Series Brushed Antique Copper 1-3/16" (30 mm) Diameter Knob, - 2923-1BAC-P

Euro Traditions Knob 1-3/16 Inch For Cabinets

Euro Traditions knob 1-3/16 inch diameter from Berenson Corporation gives cabinets a defined pull point with a consistent feel, which helps doors and drawers operate predictably on every use. The knob belongs to the Euro Traditions collection, so its styling stays consistent wherever that collection is specified across a project. Its zinc die cast material forms a solid, uniform body, supporting a stable grip point when users open heavier cabinet fronts. The antique copper finish provides a brushed, aged look that reads as warm metal, which suits traditional and transitional cabinet designs. A projection of 1-1/16 inch creates finger clearance between the user and the cabinet face, helping reduce knuckle contact against finished surfaces. The 1-3/16 inch width aligns with the stated diameter, so installers can lay out drill locations and visual spacing accurately in design drawings and shop templates.

Functional Details That Support Cabinet Layout

• The 1-3/16 inch diameter head creates a defined visual target on doors and drawers, which helps maintain proportion on standard cabinet rail and stile dimensions in kitchens, baths, and built-ins.
• The 3/4 inch base diameter sets the footprint against the cabinet surface, which helps cover standard drilled holes cleanly while leaving a visible shoulder of door or drawer material around the knob.
• The 1-1/16 inch projection brings the gripping surface forward from the door face, which supports a natural hand pull and helps minimize scuffing or finger marks around the drilling location.
• The antique copper finish presents a brushed, time-worn copper tone, which helps the knob visually coordinate with other antique copper components specified within the same space.
• The zinc die cast construction provides a single, molded body for the knob, which supports repeatable performance across multiple units installed throughout larger cabinet runs.

Mounting Measurements For Straightforward Installation

The stated 1-3/16 inch diameter lets installers center the knob accurately on door stiles or drawer fronts based on known edge distances, which speeds layout on repetitive cabinet runs. A matching 1-3/16 inch width means the face profile is symmetrical, so orientation does not change the installed appearance. The 3/4 inch base diameter tells the installer how much flat surface is needed around the hole, which helps when working near panel profiles or narrow rails. A 1-1/16 inch projection defines how far the knob stands off the surface, which matters when doors open near walls or adjacent doors where clearance is limited. The knob uses an 8-32 x 1 inch screw size, so drill-through holes can be sized confidently around that standard machine screw thread.

Where This Berenson Knob Works And Why It Helps

Using The Euro Traditions Knob On Cabinets

The Berenson Euro Traditions Series brushed antique copper knob is designed for cabinet use, giving doors and drawers a defined metal pull point that matches the Euro Traditions collection. Its 1-3/16 inch diameter face provides a comfortable contact area, which suits frequently used kitchen and bath fronts. The antique copper finish offers a brushed appearance that fits projects calling for warmer metal tones, which can help tie together hinges, pulls, and other decorative pieces in similar finishes. With a 3/4 inch base diameter, the knob seats firmly against the door or drawer surface, which supports a stable feel as users open and close casework throughout a room. The zinc die cast material enables consistent molding of each knob, which supports uniform appearance when many are installed across banks of cabinetry.

Dimensions And Details That Support Repeatable Results

The 1-3/16 inch diameter and matching width make layout predictable, which helps installers maintain even sightlines when spacing knobs across multiple doors and drawers. Because the 1-1/16 inch projection is fixed, the clearance between the grip point and the cabinet face remains consistent, which supports smooth hand access on both small and wide fronts. The 3/4 inch base diameter defines the bearing area against the cabinet, which is useful when aligning the knob on narrow rails without overlapping edge profiles. The specified 8-32 x 1 inch screw size aligns with a common cabinet hardware standard, which streamlines drilling and assembly on shop-built or field-installed casework. The antique copper finish is clearly identified, which helps designers call out the same finish code throughout drawings and specifications for coordinated hardware schedules.

Common Questions About This Euro Traditions Knob

Select This Knob For Coordinated Cabinet Projects

The Berenson Euro Traditions Series brushed antique copper knob gives projects a defined 1-3/16 inch diameter pull point with a 1-1/16 inch projection and 3/4 inch base, so installers can plan layouts and drilling using known, repeatable dimensions. Its zinc die cast construction and specified 8-32 x 1 inch screw size align with standard cabinet hardware practices, which supports efficient work on both shop-built and on-site casework using the Euro Traditions collection finish scheme.