Berenson Euro Moderno cup pull gives cabinets a defined grip point with a 2-1/2 inch (64 mm) center to center layout, which sets consistent hole spacing across doors and drawers. The zinc die cast material forms a rigid pull body that resists flex during regular cabinet use, helping doors and drawers open in a controlled, predictable way. A brushed nickel finish creates a muted metallic surface that visually coordinates with other brushed nickel fittings, supporting a unified hardware look on a project. The 3-1/16 inch overall length keeps the pull compact, which works well on narrower drawer fronts where space is limited. A 15/16 inch projection establishes hand clearance from the cabinet face while still holding the pull close to the front, which matters when working around adjacent doors or tight runs. The 1-1/8 inch width provides a stable gripping edge along the cup profile.
The 2-1/2 inch (64 mm) center to center spacing on this Berenson Euro Moderno cup pull establishes the distance between mounting points, which is useful when drilling new fronts or aligning with existing 64 mm layouts. The 3-1/16 inch overall length and 1-1/8 inch width define the visible footprint, which helps position the pull so it aligns with rails, stiles, or drawer front edges. A 15/16 inch projection sets the stand-off from the cabinet face, which determines how fingers engage the pull during opening. With a brushed nickel finish over zinc die cast material, the pull presents a consistent surface and mass, which supports a uniform appearance when multiples are installed across a full run of cabinetry.
This Euro Moderno cup pull from Berenson Corporation, in the decorative hardware and moldings handles and pulls class, is suited to cabinet and drawer fronts that are drilled on a 2-1/2 inch (64 mm) center to center pattern, because its mounting holes align directly to that spacing. The compact 3-1/16 inch length works on small or medium drawer faces where larger pulls might crowd the design, giving a defined grip without overpowering the front. A 1-1/8 inch width keeps the cup profile balanced on common rail heights, which supports a proportional look on framed and frameless cabinets. The brushed nickel finish coordinates with brushed nickel fixtures, so this pull can visually tie wall cabinets, base cabinets, and drawer banks into a single hardware theme across a kitchen, bath, or built-in.
The 2-1/2 inch (64 mm) center to center dimension on the Berenson Euro Moderno cup pull allows repeat drilling with standard cabinet jigs set to 64 mm, which speeds layout on production or multi-piece jobs. A 15/16 inch projection keeps the gripping surface close to the cabinet front while still giving finger clearance behind the cup edge, which helps users hook their fingers without contacting the door or drawer face. The 3-1/16 inch overall length leaves clearance toward the ends of typical drawer fronts, which is useful when setting pulls away from edges or neighboring hardware. Zinc die cast construction gives the pull a cast metal feel and defined edges along the cup profile, which helps hands register on the same gripping area each time. Combined with the brushed nickel finish, these dimensions and materials support consistent operation and a unified look wherever the pull is installed on the project.
The Berenson Euro Moderno cup pull has a 2-1/2 inch (64 mm) center to center size, which sets the distance between mounting holes for consistent cabinet and drawer layouts.
The cup pull measures 3-1/16 inches in overall length, which defines how much of the cabinet front it spans and helps with spacing on smaller drawer faces.
The Euro Moderno cup pull is made from zinc die cast material, which creates a solid cast body for a firm hand feel during regular cabinet use.
This Berenson Euro Moderno cup pull has a brushed nickel finish, which provides a muted metallic look that coordinates with other brushed nickel hardware and fixtures.
The cup pull has a 15/16 inch projection, which sets hand clearance away from the cabinet surface for a clean grip without excessive protrusion.
The Berenson Euro Moderno cup pull has a 1-1/8 inch width, which establishes the vertical size of the cup profile on the cabinet front.
The Berenson Euro Moderno cup pull combines a 2-1/2 inch (64 mm) center to center layout, 3-1/16 inch overall length, and 1-1/8 inch width, giving clear mounting and footprint dimensions for cabinet work. Its zinc die cast construction and brushed nickel finish define both feel and appearance, which supports consistent hardware selection across a job. For projects using 64 mm drilling patterns and brushed nickel hardware themes, this cup pull provides a defined, repeatable option for doors and drawers.