Berenson Euro Moderno Pull For Cabinets

Berenson Euro Moderno pull gives cabinets a clean, modern grip with a 3-3/4 inch center to center mounting. This fixed hole spacing lets installers layout drilling quickly and repeat the same measurements across multiple doors or drawers on a run. The pull is part of the Euro Moderno collection, so it maintains a consistent visual line when used throughout a project. Its brushed black nickel finish provides a dark metallic look that helps transitions between stainless appliances and darker cabinet finishes. The pull body is made from zinc die cast, creating a solid piece that handles daily door and drawer use. An overall length of 5-1/4 inches gives enough hand clearance for a comfortable grab without dominating a standard cabinet front. Projection of 15/16 inch and a width of 5/8 inch keep the pull low-profile while still providing a defined edge to pull against.

Key Euro Moderno Pull Details For Jobs

• The 3-3/4 inch (96 mm) center to center drilling on this Euro Moderno 96mm pull matches a common layout, which helps keep boring locations consistent from cabinet to cabinet during installation.
• A brushed black nickel finish on this black nickel cabinet pull gives a subdued metallic tone, helping it coordinate with both light and dark doors without high-gloss reflections on the face.
• The zinc die cast construction of this zinc die cast cabinet pull creates a rigid handle, supporting frequent use on active kitchen or bath cabinet fronts.
• An overall 5-1/4 inch length on this 5-1/4 inch cabinet handle spreads the grip area across more of the rail or stile, which can visually balance wider drawer fronts.
• A 15/16 inch projection and 5/8 inch width create a comfortable finger space behind the pull, helping users get a secure hold while keeping the hardware close to the cabinet face.
• A base diameter of 7/8 inch at each end gives a defined footprint against the door or drawer, which can visually cover minor layout variances around the mounting holes.

Installation Fit For 3-3/4 Center To Center Pulls

This 3-3/4 center to center pull uses a 96 mm drilling spread, so it aligns with standard 96 mm boring patterns used on many cabinet lines. The pull is designed for use with 8-32 x 1 inch screw size, which matches common screw threading in cabinet construction. That screw pairing connects the zinc die cast body securely to typical cabinet door and drawer thicknesses. The 5-1/4 inch overall length provides a clear visual reference when laying out spacing between adjacent pulls on wide drawer banks. With a 15/16 inch projection, the pull stands off the face enough for a comfortable grip while still keeping the working edge close to the cabinet surface. The 7/8 inch base diameter at each mounting point defines where the pull meets the wood, which can help visually square the handle to the door edge.

Using This Euro Moderno Series Handle On Projects

Where This Berenson Euro Moderno Pull Fits Best

The Berenson Euro Moderno Series pull is specified with a 3-3/4 inch (96 mm) center to center dimension, so it suits cabinet doors and drawers drilled on that common spacing. This makes it appropriate for many kitchen, bath, and storage installations using standard metric boring. Its 5-1/4 inch overall length gives enough span to look proportional on typical base and wall cabinet doors without overwhelming narrower faces. On drawer fronts, that length can serve as the primary handhold across small and medium widths. The brushed black nickel finish lets the pull work on cabinets that use darker stains or painted finishes while still tying into metal elements in the room. As part of the Euro Moderno collection, this pull supports a unified look when the same series is used on all fronts in the space.

Details That Support Consistent Cabinet Results

The fixed 96 mm center to center drilling on this Euro Moderno 96mm pull simplifies layout when using boring jigs or CNC programs set for 3-3/4 inch spacing. Installers can repeat the same centers across every door and drawer front, which supports straight lines of hardware across banks of cabinets. The zinc die cast material forms a single, solid pull body that holds its shape at the 5-1/4 inch length, which helps it feel stable when mounted at both ends. A 15/16 inch projection positions the gripping surface away from the face just enough for fingers to wrap behind, which can streamline everyday opening and closing. The 5/8 inch width gives the front edge a defined profile, making it easy for users to hook fingers from above or below. With a base diameter of 7/8 inch at each mounting point, the pull visually anchors to the cabinet surface, which can help mask small variances in hole placement while keeping the handle looking straight.

Common Questions About This Black Nickel Cabinet Pull

Selecting This Pull For 96mm Cabinet Layouts

This Berenson Euro Moderno pull combines a 3-3/4 inch (96 mm) center to center layout with a brushed black nickel finish, matching many modern cabinet plans. The zinc die cast construction, 5-1/4 inch overall length, and 15/16 inch projection work together to support everyday use on doors and drawers. For projects built around 96 mm boring, this 9720-1BBN-P cabinet pull provides a consistent look and familiar mounting details across the entire run.