
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Euro Classica knob 1-3/8 inch from Berenson Corporation is a zinc die cast cabinet knob in the Euro Classica collection with a brushed tin finish. The 1-3/8 inch diameter head gives a defined gripping area, which helps when opening heavier cabinet doors or wider drawers. A projection of 1-1/8 inch sets the knob off the surface, creating finger clearance that supports comfortable pulls in tight kitchen or shop layouts. The 1-1/16 inch base diameter spreads contact on the door or drawer front, which helps distribute load around the mounting hole. Matching 1-3/8 inch width and diameter support a balanced look across a run of fronts. The brushed tin finish presents a muted metallic surface that works in decorative hardware applications where a softer appearance is preferred. Manufacturer part number 7094-1BT-P identifies this exact Euro Classica design and finish.
The Euro Classica zinc die cast knob uses a 1-3/8 inch diameter and 1-1/8 inch projection, which sets the distance your hand operates away from the cabinet face. The 1-1/16 inch base diameter identifies the contact circle where the knob meets the surface, which matters when planning layout near panel edges or decorative profiles. With an M4 x 45mm screw size specified, the knob uses a metric thread pattern, which guides hardware selection when fastening through typical cabinet door or drawer front thicknesses. The combination of these dimensions defines how the knob positions on the workpiece, guiding hole placement and spacing across a coordinated hardware plan.
The Berenson Euro Classica Series brushed tin 1-3/8 inch diameter knob is suited to decorative hardware and moldings applications where a consistent knob profile is needed across multiple fronts. Its 1-3/8 inch diameter and matching width give a centered look on standard cabinet doors and medium-width drawers, supporting visual alignment in kitchen, bath, or office cabinetry. The brushed tin finish ties into other brushed tin hardware, which helps maintain one finish family on jobs that use coordinating pulls, hinges, or decorative elements. As part of the Euro Classica collection, the knob presents a defined, repeatable style that supports using the same design across upper cabinets, base units, and casework in woodworking projects handled through Wurth Baer Supply.
The defined 1-3/8 inch head diameter on this Euro Classica zinc die cast knob sets a clear reference when laying out centerlines, which supports accurate drilling patterns across cabinet banks. A base diameter of 1-1/16 inch constrains how close the knob can sit to panel edges or raised profiles, helping installers plan positions that keep the base fully on flat material. The 1-1/8 inch projection positions the gripping point forward, which can assist in avoiding interference with adjacent doors or trim when doors swing or drawers extend. Specifying an M4 x 45mm screw size gives a clear metric for the threaded engagement, which supports selecting compatible drilling diameters and understanding how the fastener passes through common door and drawer thicknesses. Together, these measurements help installers reproduce the same result across multiple cabinets with this 7094-1BT-P Euro Classica knob.
The Berenson Euro Classica 7094-1BT-P knob has a 1-3/8 inch (35 mm) diameter head, which defines the pulling surface and helps plan spacing on cabinet doors and drawers.
The Euro Classica zinc die cast knob has a 1-1/8 inch projection, which sets hand clearance from the door or drawer front during everyday operation.
The 7094-1BT-P Euro Classica knob is made from zinc die cast, which provides a solid metal construction for cabinet and drawer hardware use.
This Berenson cabinet knob uses a brushed tin finish, which delivers a muted metallic appearance suited to decorative hardware and moldings projects.
The Euro Classica zinc die cast knob specifies an M4 x 45mm screw size, which defines the thread pattern and length used for fastening through cabinet fronts.
The Berenson Euro Classica 7094-1BT-P knob has a 1-1/16 inch base diameter, which defines the contact area on the cabinet face for layout near panel edges.
The Berenson Euro Classica Series brushed tin 1-3/8 inch diameter knob combines zinc die cast construction, defined Euro Classica styling, and clear dimensions for head, base, and projection. For runs where matching decorative hardware matters, the 7094-1BT-P knob provides a consistent 1-3/8 inch profile and brushed tin finish that align with detailed cabinet layouts. Use these verified measurements and finish details to plan hole locations, clearance, and visual rhythm across your cabinet or casework project with Wurth Baer Supply.
Sold In: 1 Each