Clip-on cam adjustable wing mounting plate gives you a dedicated Salice America hinge mounting solution for cabinet projects using Salice face-frame or frameless hinges. This hinge mounting plate belongs to the hinge mounting plates product class, so it serves as the interface between the cabinet side and compatible Salice hinge arms. The 0mm mounting plate height keeps the door overlay relationship defined by the hinge geometry, which matters when you are matching multiple doors across a run. Nickel-plated construction provides a corrosion-resistant surface, supporting long-term use in typical cabinet environments. The wing style plate spreads the load across the cabinet surface, which helps maintain alignment under repeated door movement. As a clip-on plate, it allows Salice hinges to be clipped on and off the plate without disturbing the mounting position, which saves time during installation, adjustment, and future service.
Depth adjustment from -0.5 mm to +2.8 mm by the eccentric cam gives you controlled in-and-out movement of the door once the hinge arm is attached, which is useful for dialing in reveals after the cabinet is installed. Height adjustment of plus or minus 2 mm by the slotted holes in the plate lets you shift the hinge location vertically without re-drilling, so you can correct minor drilling offsets or cabinet sag quickly. The standard 37 mm x 32 mm positioning provides a predictable footprint for drilling jigs, which helps maintain consistency from cabinet to cabinet. Pre-mounted Euro screws are integrated directly in the plate, giving a screw-in fixing method that bites into 5 mm system holes, which keeps the plate stable under repeated door cycles.
This Salice hinge mounting plate is specified as an economical clip-on plate compatible with all Salice hinges Series F and Series B, so it fits projects where those hinge lines are already part of the hardware standard. The 0mm plate height maintains the hinge geometry defined by Series F and Series B hinges, which matters when you want overlay and door position to match existing Salice installations. The wing style design increases the surface contact area between plate and cabinet, which helps distribute the load on the cabinet side panel in taller or heavier doors that still use these hinge families. Its standard 37 mm x 32 mm positioning dimension aligns with common European cabinet drilling systems, so it works well in shop settings already geared to that pattern. The product classification as a hinge mounting plate positions it as the structural link between cabinet and hinge, making it central to door alignment and long-term operation.
The depth adjustment range of -0.5 mm to +2.8 mm provided by the eccentric cam lets you fine-tune the door setback after the hinge arm is clipped on, which reduces the need to relocate plates when the cabinet face is slightly out of plane. Height adjustment of plus or minus 2 mm using the slotted holes creates room for vertical tweaking, which is valuable when aligning multiple doors so that top and bottom edges track across a long run. Pre-mounted Euro screws engage directly into 5 mm style system holes in cabinet sides, giving a solid mechanical connection that resists plate shift during adjustment, which helps preserve settings once you have the doors tuned. The nickel-plated, corrosion-resistant finish maintains smoother interaction between plate and hinge over time, which supports quieter, consistent operation through normal humidity swings. Because this mounting plate is economical yet backed by a lifetime warranty from Salice America, it lets shops standardize on a plate that supports repeatable fits while protecting against premature hardware replacement.
This mounting plate is compatible with all Salice hinges Series F and Series B, so it can be used across projects that rely on those two Salice hinge families.
The 0mm mounting plate height keeps the hinge arm at its designed position from the cabinet surface, which maintains the door overlay geometry specified by the Salice hinge series.
The depth adjustment of -0.5 mm to +2.8 mm by eccentric cam lets you move the door in or out slightly, which helps create consistent gaps between doors and cabinet faces.
This hinge mounting plate offers height adjustment of plus or minus 2 mm through its slotted holes, allowing small vertical shifts to line up adjacent cabinet doors.
The standard 37 mm x 32 mm positioning matches common European drilling layouts, which supports repeatable boring setups on cabinet sides using jigs or line-boring machines.
The nickel-plated, corrosion-resistant finish protects the hinge plate from moisture exposure, supporting long-term cabinet performance in typical kitchen, bath, or shop environments.
This Salice America BAV4L09F/16 hinge mounting plate pairs directly with all Salice hinges Series F and Series B, giving you one 0mm plate to standardize across those hinge lines. Depth adjustment from -0.5 mm to +2.8 mm and height adjustment of plus or minus 2 mm provide the fine-tuning range needed to align doors cleanly without re-drilling. Nickel-plated, corrosion-resistant construction and the wing style cabinet interface support durable cabinet performance where these hinges are specified. For shops and installers working regularly with Salice Series F and B, this economical clip-on mounting plate offers a consistent drilling pattern and adjustable fit for repeatable cabinet door results.
Sold In: 1 Each