
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Pasco 150 Grit 3 x 50yd Aluminum Oxide Sanding Rolls gives you a long, continuous abrasive roll sized for repeated use in general purpose sanding, so one roll can handle multiple setups or drum sander changes on ongoing jobs. As a Pasco drum sander roll for general purpose sanding, it is designed to support everyday stock smoothing and cleanup where a consistent 150 grit finish is needed across many workpieces. The 3 inch width pairs with the 50 yard length to supply enough material for extended sanding runs, which helps keep workflow steady on larger batches. Aluminum oxide on heavy duty X-weight cloth provides the abrasive cut on a strong backing, so the roll stands up to demanding passes where material removal and surface leveling are repeated. The abrasive rolls format keeps the material ready to cut to length, which supports flexible use across different drum or setup lengths.
Aluminum oxide on heavy duty X-weight cloth means the abrasive grain is bonded to a strong cloth backing, so the sanding roll is suited for applications where a stronger backing is needed during general purpose sanding. This construction works with drum sander use, where tension and pressure are applied repeatedly along the wrapped abrasive, because the X-weight cloth supports the abrasive layer under load. As an Abrasive Rolls product, the continuous roll format also aids installation by letting you cut lengths that match your drum or sanding setup, so the abrasive can be tensioned around the drum with minimal waste. The Pasco 150 Grit 3 x 50yd Aluminum Oxide Sanding Rolls identity ties the specific grit, width, and length to this backing style, which helps match the roll to tasks that call for medium-fine sanding with a durable support. That combination keeps the abrasive working consistently across many passes in day-to-day use.
The Web Description specifies a Pasco drum sander roll for general purpose sanding, so this product fits workloads where a drum sander handles routine surface prep or cleanup across multiple parts. The 150 grit level works between coarse leveling and final finishing, giving a medium-fine surface that can be left as-is for utility pieces or followed by finer grits when a smoother finish is required. The 3 inch width and 50 yard length allow the same roll to serve a range of drum lengths simply by cutting different sections, supporting situations where one sanding station might process various part sizes over time. Because it belongs to the Abrasive Rolls category and Product Class Abrasive Rolls, it functions as a flexible abrasive source rather than a fixed length strip, which suits shops that regularly adjust drum setups.
Aluminum oxide on heavy duty X-weight cloth provides a balance of cutting capability and backing strength that matters whenever sanding pressure is applied along a rotating drum. The heavy duty X-weight cloth is identified as a heavier backing for applications where a stronger backing is needed, so it supports the abrasive during extended runs where lighter backings might wear or deform sooner. As a Pasco abrasive roll, this combination is aimed at general purpose sanding, so it can handle repeated passes that remove material while leaving a controlled scratch pattern from the 150 grit grain. The continuous 3 x 50yd format means the same abrasive construction is available across many cut lengths, helping maintain predictable results from one wrap to the next. Under the manufacturer part RL3X50YD150XW341, the product ties grit, dimensions, and backing type together so replacements match previous performance on established drum setups.
Pasco 150 Grit 3 x 50yd Aluminum Oxide Sanding Rolls provides 150 grit abrasive in a 3 inch wide, 50 yard long roll, giving a medium-fine cut over an extended length for multiple uses.
The product is described as a Pasco drum sander roll for general purpose sanding, so it is intended for drum sander applications handling routine surface preparation and cleanup tasks.
Pasco 150 Grit 3 x 50yd Aluminum Oxide Sanding Rolls uses aluminum oxide on heavy duty X-weight cloth, giving the abrasive a stronger backing for applications needing added support under load.
The heavy duty X-weight cloth is specified as a heavier backing for applications where a stronger backing is needed, so it supports the abrasive during demanding drum sanding passes.
The 150 grit rating on this general purpose sanding roll suits medium-fine work, refining surfaces after coarser steps while still removing small defects before any finer finishing stages.
Manufacturer part RL3X50YD150XW341 reflects the 3 inch width, 50 yard length, 150 grit, and X-weight cloth backing, helping match this exact roll when repeating a successful setup.
Pasco 150 Grit 3 x 50yd Aluminum Oxide Sanding Rolls combines a 150 grit abrasive surface with aluminum oxide on heavy duty X-weight cloth, so one roll serves general purpose sanding where a stronger backing is needed. The 3 inch width and 50 yard roll length provide enough material for repeated drum sander wraps or adjustments across many jobs, supporting continuous work in shops that rely on general purpose sanding passes. As an Abrasive Rolls product, it offers a flexible, cut-to-length format under the manufacturer part RL3X50YD150XW341, tying dimensions and construction together whenever the same performance is required again.
Sold In: 1 Roll