Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PASCO 100 grit edge sanding belt is a 2-1/4 inch x 80 inch aluminum oxide belt on X-weight cloth that delivers a controlled cut on edge sanding setups where consistent contact across the belt length matters. The aluminum oxide abrasive works as a general-purpose grain for sanding operations that need a balance between stock removal and surface preparation. The X-weight cloth backing supports the abrasive so the belt runs with the firmness needed for edge sanding applications. The 100 grit rating establishes a medium-fine scratch pattern that prepares workpieces for further sanding steps. The 2-1/4 inch width helps focus the sanding path along narrow edges. The 80 inch length matches equipment that accepts this belt size so the belt tracks along the full platen during use.
This PASCO abrasive belt uses an X-weight cloth backing that supports the belt structure when mounted on edge sanding equipment built for 2-1/4 inch x 80 inch belts. The belt length runs over the contact drum and platen so the abrasive tracks around the machine path. The open coat design on the aluminum oxide surface reduces loading, which helps maintain an even sanding action along the entire length of the belt during continuous passes. The 100 grit rating positions this belt where a medium-fine cut is needed for edge surfaces that will see additional sanding or finishing work afterward.
This PASCO 2-1/4 inch x 80 inch aluminum oxide belt is sized for edge sanding setups that accept this specific belt dimension. The defined length allows the belt to tension correctly over the machine drums so the abrasive surface tracks in line during operation. The X-weight cloth backing supports the belt as it contacts edges along the platen, which helps maintain a consistent sanding line along door parts, panels, or similar workpieces. With 100 grit abrasive, the belt shapes and refines edges in one step where a medium-fine finish is required before subsequent sanding stages. The open coat design prevents loading of the abrasive, which is useful in runs where dust accumulation could otherwise reduce cutting efficiency.
The XW341 alum oxide cloth, X weight construction described for this belt combines aluminum oxide grain with an X-weight cloth backing so the abrasive layer stays supported during repeated edge passes. This structure matters when running longer workpieces because the belt maintains contact pressure along the platen. The aluminum oxide grain delivers a dependable cut rate suited to general sanding duties, supporting both shaping and surface refinement on compatible materials. The open coat design is specified to prevent loading of the abrasive, which helps extend the usable cutting action between belt changes. The defined 100 grit rating sets expectations for the resulting surface, positioning this belt in workflows that move from coarser grits toward finer finishing steps.
This PASCO belt uses aluminum oxide abrasive on X-weight cloth, which provides a general-purpose cutting action supported by a firm backing for edge sanding use.
This belt is 100 grit, which produces a medium-fine scratch pattern suited to intermediate sanding steps before finer finishing work.
The belt measures 2-1/4 inches wide by 80 inches long, which fits edge sanding machines designed around this specific belt size.
The X-weight cloth backing on this belt provides a firm, supportive base for the abrasive, which helps the belt hold shape under normal edge sanding pressure.
The open coat design prevents loading of the abrasive, which helps maintain consistent cutting action when sanding materials that create fine dust.
This belt is identified by manufacturer part number B21/480100XA345 and by the XW341 alum oxide cloth, X weight description.
This PASCO 100 grit 2-1/4 inch x 80 inch edge sanding belt uses aluminum oxide on X-weight cloth with an open coat design, so it supports medium-fine edge sanding where loading resistance and belt stability are important. The defined size aligns with machines built for this belt dimension, allowing the abrasive to track correctly over the drums and platen. For operations that move workpieces through sequential sanding grits, this belt fits the stage where edges need both refinement and controlled material removal, making it a direct choice when specifying belts for edge sanding lines.
Sold In: 1 Belt