Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PASCO 80 grit edge sanding belt pairs an 80 grit abrasive with a 4 inch by 80 inch belt size, giving edge sanders a medium-cut belt that suits sizing, clean-up, and profile work on woodworking runs. The belt is built on an X-weight cloth backing, so the abrasive sits on a sturdy base that supports steady tracking and helps the belt stay stable under typical edge sander pressure. Aluminum oxide abrasive on the belt delivers a sharp cutting surface that removes stock efficiently on common shop materials. The XW341 resin bond cloth construction locks the abrasive to the backing with a resin system, helping the grit stay attached as the belt works across edges and faces. For busy shops that run multiple passes per part, this setup supports repeatable sanding results while keeping the workflow predictable from belt to belt.
The 4 inch width on this abrasive belt fits edge sanders designed for that belt width, giving the contact area needed to support edges on doors, panels, and components. With an 80 inch overall length, the belt wraps standard drums and idlers in that size class, maintaining the tracking path that operators expect on matching machines. The X-weight cloth backing works under the belt tension typical for edge sanders, helping the belt resist stretching so contact with the workpiece stays even along the platen. Using aluminum oxide as the cutting grain pairs well with day-to-day shop materials, letting installers and production teams run the same belt type through repeated passes. The XW341 resin bond cloth structure keeps the abrasive anchored to the backing while the open coat spacing sheds dust, so the belt maintains a more open cutting surface through longer sanding sequences.
This abrasive belt belongs on edge sanding equipment that accepts a 4 inch by 80 inch belt, placing it directly in cabinet, door, and panel workflows where edges need a consistent medium cut. In a typical sequence, the 80 grit surface handles the early flattening step after machining, knocking down tool marks and light steps so later grits have a smoother starting point. The X-weight cloth backing supports firm platen pressure, which helps keep edges straight as parts ride the fence. With aluminum oxide as the abrasive, the belt works across common shop stock such as panels, rails, and stiles, allowing teams to run the same belt style across multiple jig setups. The XW341 resin bond cloth construction supports this role by holding grit steady on the backing so the scratch pattern stays more uniform from the beginning of the belt life to later passes.
The open coat design spaces the aluminum oxide grains across the belt surface, which helps dust and swarf move out of the cutting zone instead of packing between particles. On real sanding runs, that spacing keeps the abrasive points more exposed, so the belt continues to cut rather than glazing over. The resin bond in the XW341 resin bond cloth ties each grain securely to the X-weight backing, helping the abrasive hold up when operators lean on the workpiece or run repeated passes on the same belt. This bond and backing combination reduces how quickly grit sheds under normal sanding pressure, supporting longer, more consistent runs per belt change. For shops tracking part flow, that stability helps schedule sanding work with fewer interruptions and keeps the finish quality more predictable from part to part throughout a batch.
The PASCO 80 grit edge sanding belt measures 4 inches by 80 inches, so it fits edge sanding machines built for that belt length and width to maintain proper tracking and contact area.
This PASCO sanding belt uses aluminum oxide abrasive, giving a cutting surface suitable for general woodworking tasks where a consistent medium-cut scratch pattern is needed.
The 80 grit rating provides a medium level of stock removal that smooths machining marks and prepares edges for finer grits in a step-down sanding sequence on cabinets and components.
The X-weight cloth backing gives the belt a strong yet flexible base, so it holds tension on edge sanders while maintaining a steady contact surface during repeated passes.
The XW341 resin bond cloth construction secures abrasive grains to the cloth backing with resin, helping maintain consistent cutting as the belt runs through multiple sanding cycles.
The open coat design spaces abrasive grains so dust has more room to escape, which helps limit loading on the belt and supports more consistent cutting across longer runs.
This PASCO 80 grit edge sanding belt from Wurth Baer Supply combines a 4 inch by 80 inch size with aluminum oxide abrasive on an X-weight cloth, giving edge sanders a stable, medium-cut belt. The XW341 resin bond cloth with open coat spacing supports cleaner cutting and steadier performance over extended runs. When a sanding station needs a repeatable 80 grit step in the line, this belt configuration aligns well with day-to-day cabinet and woodworking production.
Sold In: 1 Belt