Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PASCO 100 Grit 4 x 80 Edge Sanding Belt gives a 4 inch wide by 80 inch long abrasive belt that suits edge sanding setups where that size is required, so material feeds across a stable, repeatable sanding surface. The 100 grit rating means the belt cuts at a medium-fine level, so it refines machine marks while still removing material efficiently in production or shop work. Aluminum oxide on the belt provides a commonly used abrasive grain, so it delivers a familiar cut pattern that aligns with typical woodworking and shop finishing sequences. The belt uses an X-Weight cloth backing, so it supports the abrasive on a heavier cloth that stands up to tensioned belt tracking on edge sanders. The SAP description XW341 Resin Bond Cloth indicates a resin bond system on cloth, so the grit stays anchored under normal belt pressures.
The 4 x 80 size defines both belt width and loop length, so machines built around this dimension accept the belt without changing guard or platen positions. The aluminum oxide abrasive on X-Weight cloth gives a belt structure that tracks under normal edge sander tension, so setup focuses on aligning the belt rather than compensating for stretch-prone backing. The resin bond cloth noted as XW341 holds the abrasive to the backing under typical belt speeds, so the sanding face remains consistent across the belt length. The 100 grit rating positions the belt for intermediate sanding tasks, so operators can match machine settings to a cut suited to cleanup, light stock removal, or pre-finishing steps.
The PASCO 100 Grit 4 x 80 Edge Sanding Belt fits applications that rely on a 4 inch wide sanding path, so door parts, panels, or similar components present a broad edge to the abrasive. The 80 inch loop length works with edge sanders sized for that belt length, so tracking, platen coverage, and guard positions align with the specified dimensions. The 100 grit aluminum oxide abrasive on X-Weight cloth suits medium-fine edge sanding, so operators can use it after milling to refine surfaces before moving toward finer grits. The XW341 resin bond cloth construction maintains abrasive contact with the work as the belt wraps around rollers and passes the platen, so the cutting surface stays uniform along the belt path during repeated passes.
The defined 4 x 80 belt size allows shops standardizing on that dimension to keep machine setups repeatable, so operators can swap belts without changing fence or platen positioning. Using aluminum oxide on an X-Weight cloth backing creates a balance of cut and support, so the abrasive grain is backed firmly while still flexing around normal edge sander geometries. The XW341 resin bond cloth system keeps the grit bonded during belt operation, so the scratch pattern remains predictable across production runs. The 100 grit level establishes a clear place in a sanding sequence, so planners can call out this belt for intermediate steps between more aggressive and finer finishing operations. The open coat design prevents loading of abrasive br language indicates spacing between abrasive grains, so dust has space to move away from the cutting points and helps the belt stay effective during extended sanding passes.
The PASCO 100 Grit 4 x 80 Edge Sanding Belt measures 4 inches wide by 80 inches long, so it matches edge sanders designed around that belt loop dimension.
The belt uses aluminum oxide as the abrasive grain, so it delivers a familiar cut pattern suited to common sanding sequences in woodworking and similar shop work.
The belt uses an X-Weight cloth backing, so the heavier cloth supports belt tension and tracking on edge sanders during normal operation.
XW341 resin bond cloth describes a resin bond system on cloth backing, so the abrasive particles stay attached while the belt runs over rollers and platen areas.
The 100 grit rating provides a medium-fine cut, so it removes material while leaving a surface ready for follow-up sanding with finer grits.
The manufacturer part number is N8615, so this identifier helps match the specific PASCO 100 Grit 4 x 80 Edge Sanding Belt in ordering or documentation.
The PASCO 100 Grit 4 x 80 Edge Sanding Belt combines a 4 inch by 80 inch format, aluminum oxide abrasive, and X-Weight cloth with XW341 resin bond cloth, so it aligns with edge sanders and workflows built around that size and grit range. The medium-fine 100 grit cut fits intermediate sanding stages, so it supports shop processes that move parts smoothly from machining toward finishing. For operations using abrasive belts from Wurth Baer Supply, this PASCO belt provides a defined option when a 4 x 80, 100 grit aluminum oxide belt on X-Weight cloth is required.
Sold In: 10 Belt