Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PASCO wide sanding belt gives you a general purpose economical option for wide belt sanding when heavy pressures are not required. The 37 inch x 75 inch belt size matches wide sanders built around this dimension, so the belt tracks correctly across the full working width. The 100 grit abrasive cuts fast enough for stock removal while still leaving a surface suited to further sanding steps. Aluminum oxide abrasive is suited to everyday sanding tasks, so one belt style can serve many shop jobs. The X-weight cloth backing supports the abrasive under normal sanding pressure, which helps the belt stay stable as it runs across the platen or drum. As part of the PASCO abrasive belts line, this belt fits into a consistent system for wide belt sanding across similar machines.
The 37 inch x 75 inch belt dimension is set up for wide sanding machines built around this length and width, so the belt tracks within the designed contact area. The X-weight cloth backing works with typical wide belt tension systems, giving the belt the strength needed to run at operating speed. The 100 grit aluminum oxide surface interacts with stock under moderate pressure, matching the belt design intent for applications where heavy pressures are not required. The open coat layout on the abrasive face lets material clear more easily from between the grains, helping the belt maintain cutting action during the sanding cycle.
This PASCO general purpose economical wide sanding belt fits sanding setups that accept a 37 inch width and 75 inch length, so it can span the full working area on machines built for this size. The aluminum oxide abrasive on X-weight cloth suits a range of everyday sanding tasks, so the same belt can move from one general purpose operation to another within that size class. The open coat design that prevents loading of abrasive works well in situations where material dust could otherwise pack between the grains, so the belt can keep cutting through longer sanding cycles. The 100 grit rating places this belt in a working range where you can level and smooth stock while still preparing the surface for subsequent finer abrasives in the same machine family.
The X-weight cloth backing gives the belt a backing strength appropriate for general purpose sanding, so it stays stable against the contact drum and platen under regular operating pressure. That stability helps the 100 grit aluminum oxide grains cut evenly across the width, which supports uniform surface results from edge to edge on the workpiece. The open coat configuration that prevents loading of abrasive keeps more abrasive points exposed as dust is shed, so cutting action stays active instead of glazing over. Because the belt is part of the PASCO abrasive belts class with the MRO XW341 cloth wide belts designation, its construction is aligned to wide belt sanding workflows where consistent belt behavior is important from one belt change to the next.
The PASCO wide sanding belt is 37 inches wide and 75 inches long, so it is sized for wide belt sanders built around that belt envelope, supporting proper tracking and full-width sanding.
The 100 grit abrasive on this PASCO belt provides a balance between stock removal and surface smoothness, so surfaces come off the machine ready for follow-up sanding with finer grits.
The aluminum oxide abrasive on the PASCO wide sanding belt serves general purpose sanding, so one belt type can be applied to many routine woodworking and shop sanding tasks.
The X-weight cloth backing on this PASCO belt supports the abrasive under normal sanding pressure, helping the belt run steadily across the contact area without excessive flexing.
The open coat design on this PASCO sanding belt prevents loading of abrasive, so dust clears more easily from between the grains and the belt keeps cutting effectively during longer runs.
The MRO XW341 cloth wide belts description identifies this PASCO belt as part of a cloth-backed wide belt line, which aligns it with wide belt sanding equipment in that series.
This PASCO wide sanding belt in 37 inch x 75 inch size, with 100 grit aluminum oxide on X-weight cloth, aligns with general purpose economical sanding where heavy pressures are not required. The open coat design that prevents loading of abrasive supports steady cutting on routine runs, so the belt serves well in ongoing shop workflows built around this belt size and abrasive range.
Sold In: 5 Belt