Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Genesis miter fold drawer is a pre-sized drawer construction system designed for standard 24 inch wide by 14 inch deep closet openings, so it matches common closet layouts and helps keep section planning straightforward on closet runs. The drawer size of 13.77 inches deep by 16.96 inches wide by 7 inches high aligns with the listed 350mm by 431mm by 178mm dimensions, giving clear, repeatable sizing for layout and cut planning around hanging sections and shelves. This Genesis BHK drawer system uses miterfold construction, so the drawer assembles from blanks by applying wood glue, folding sides around the matching drawer bottom, and closing the remaining side onto dowels, which supports a consistent square drawer box without separate side joinery steps. The product is identified as model SFBDM18, so installers and shop teams can match it directly to project documents and re-order needs.
This Genesis drawer for standard 24 inch wide by 14 inch deep closet openings is sized to integrate into typical closet sections, so designers can set vertical spacing and hanging clearance around the 7 inch high drawer face. The miterfold construction uses wood glue, folded sides, and a matching bottom, so assembly works as a single folding operation around the bottom instead of separate side-to-side assembly, which can speed repeat builds in a shop or onsite. Closing the remaining side onto dowels creates a fixed alignment point, helping the corners stay square while the glue cures, which supports smoother runner action once installed. The 1/4 inch bottom dado and 3/8 inch bottom reveal together control how the bottom sits and how the drawer presents at the front, giving predictable clearances when lining up multiple Genesis drawer system units.
The Genesis miter fold drawer SFBDM18 is specified for standard 24 inch wide by 14 inch deep closet openings, so it is sized around a common closet module used across many reach-in and walk-in layouts. The 13.77 inch depth works within the 14 inch opening depth, leaving working clearance behind and in front for slides and back panels, which supports smoother operation in a finished closet run. The 16.96 inch width fits inside the nominal 24 inch opening, allowing room for side panels and runner hardware within that module width. The 7 inch height provides a mid-height storage space that works for folded garments or smaller items, and it aligns with the broader Genesis drawer system that offers vinyl side heights from 2-3/4 inches through 10 inches, giving designers a set of vertical options while staying in the same construction family.
The Genesis miterfold white vinyl drawer sides are sealed with Durawrap abrasion resistant surface, which supports longer service life of the visible edges and faces when drawers are opened and closed repeatedly in closet installations. The 8 mil thick vinyl material provides a defined layer over the high density particle board core, so the sides combine surface durability with a core that delivers greater screw holding strength when mounting slides or other drawer-related components. The non-flammable vinyl surface adds a material property that aligns with typical expectations in closet or storage interiors, providing a clearly stated performance characteristic. The miterfold assembly method, using wood glue, folding sides around the matching drawer bottom, and locking the last side onto dowels, creates an integrated box where the 1/4 inch bottom dado keeps the bottom positively located and the 3/8 inch bottom reveal defines the visual base line, so multiple SFBDM18 drawers can be built with consistent reveals and alignment across a full Genesis BHK drawer system installation.
The Genesis miter fold drawer SFBDM18 is designed for standard 24 inch wide by 14 inch deep closet openings, so it aligns with common closet section dimensions in many projects.
The SFBDM18 drawer measures 13.77 inches deep by 16.96 inches wide by 7 inches high, which corresponds to 350mm by 431mm by 178mm for layout and planning.
The Genesis miterfold drawer assembles by applying wood glue, folding the sides around the matching drawer bottom, and closing the remaining side onto dowels, helping produce a square, consistent drawer box.
The drawer sides use 8 mil thick white vinyl sealed with Durawrap over a high density particle board core, giving abrasion resistance and greater screw holding strength for hardware attachment.
All vinyl miterfold drawers in this line, including SFBDM18, have a 1/4 inch drawer bottom dado and a 3/8 inch bottom reveal, which control bottom seating and front appearance.
The vinyl drawer side heights in this Genesis miterfold line range from 2-3/4 inches through 10 inches, placing the SFBDM18 at a 7 inch mid-range height.
The Genesis miter fold drawer SFBDM18 combines a defined size for standard 24 inch wide by 14 inch deep closet openings with a miterfold construction method that supports repeatable assembly around the matching drawer bottom. The Durawrap abrasion resistant white vinyl sides over a high density particle board core provide both surface durability and greater screw holding strength when installing drawer hardware. With a 13.77 inch depth, 16.96 inch width, 7 inch height, and the standardized 1/4 inch bottom dado plus 3/8 inch bottom reveal, this BHK Genesis drawer system component gives closet projects a clearly specified, repeatable drawer option ready to align with other vinyl miterfold heights from 2-3/4 inches through 10 inches in the same line.
Sold In: 1 Each
