Schuab 703-DN solid brass knob describes a Schaub and Company Traditional Series knob designed for cabinet and furniture doors or drawers where a compact, classic pull point is needed. The knob is made from solid brass, so the body provides a dense, sturdy feel during everyday use. Its distressed nickel finish creates a muted metallic look, which helps the knob sit comfortably with traditional or transitional cabinet styles without reflecting harsh glare. With a 1-1/4 inch (32 mm) diameter, the grip size gives fingers a defined edge to pull against while keeping the profile visually balanced on doors and drawers. A 3/4 inch base diameter steps the knob down cleanly to the mounting surface, which helps visually center the knob on typical cabinet frames. The 7/8 inch projection sets the hand clearance from the door or drawer front, supporting a fingertip pull without pushing the knob too far into the room.
This 703-DN solid brass cabinet knob relies on an 8-32 x 1 inch screw size for its threaded connection to the door or drawer front, so it interfaces with standard 8-32 machine-thread cabinet hardware practices. The 1-1/4 inch diameter offers a clear target when positioning knobs on rails or drawer fronts, which helps keep layout lines uniform across a run of cabinets. With a 3/4 inch base diameter, the contact circle sits well inside typical rail widths, supporting centered or offset placements without overhanging the edge. The 7/8 inch projection determines the gap between the userâ??s hand and the cabinet surface during pulls, keeping fingers clear of the face while allowing the knob to sit relatively low-profile against the cabinetry.
The Traditional Series identity positions this Schaub and Company 703-DN knob for cabinet and furniture applications that call for a classic, understated look rather than a highly modern shape. Its distressed nickel finish coordinates with other nickel decorative hardware, so it fits well on kitchen, bath, or built-in cabinetry that already leans toward warm or muted metal tones. The 1-1/4 inch diameter suits standard cabinet doors and medium-width drawer fronts, offering enough presence to read visually without overwhelming narrow frame members. A 3/4 inch base diameter keeps the footprint compact, which helps place the knob on narrow stiles or smaller drawer fronts while still reading as a finished, intentional detail. Because the projection is 7/8 inch, the knob stands out far enough to grasp on full-overlay and face-frame constructions while remaining close to the surface in tight galley runs or utility spaces.
The 1-1/4 inch diameter on this solid brass cabinet knob sets a repeatable standard for layout spacing, so installers can align knobs along upper and lower cabinet rows knowing the scale will read consistently across the job. The 3/4 inch base diameter creates a clear transition between the knob head and cabinet face, which helps seat the knob flat against the wood surface and keeps the contact area neatly inside stile or rail boundaries. With a 7/8 inch projection, the pull point sits at a predictable distance from the door or drawer, allowing users to hook fingers behind the knob without dragging knuckles across the finish. The 8-32 x 1 inch screw size ties the knob to common cabinet drilling setups, which streamlines the process when moving between multiple doors and drawers on the same project. Solid brass material throughout the knob body gives each pull a consistent, weighty feel that matches the Traditional Series look and supports repeatable performance across every opening.
The Schaub Traditional Series 703-DN knob has a 1-1/4 inch (32 mm) diameter head, a 3/4 inch base diameter, and a 7/8 inch projection, giving it a compact yet functional profile for cabinet doors and drawers.
The 703-DN cabinet knob is made from solid brass with a distressed nickel finish, providing a sturdy brass core with a muted nickel appearance suited to Traditional Series styling.
The 7/8 inch projection sets the knob slightly off the door or drawer front, giving enough finger room to pull while keeping the hardware low-profile on the cabinet face.
The Schaub and Company 703-DN knob uses an 8-32 x 1 inch screw size, matching a standard 8-32 machine thread commonly used in cabinet hardware installations.
The Traditional Series design and distressed nickel finish suit cabinets and furniture needing a classic, understated metal knob that coordinates with other nickel decorative hardware.
The 1-1/4 inch diameter gives a defined gripping surface that is easy to locate by hand and visually balanced on standard cabinet doors and medium-width drawer fronts.
The Schaub Traditional Series Distressed Nickel 1-1/4 inch Diameter Knob 703-DN from Wurth Baer Supply combines solid brass construction, a distressed nickel finish, and defined dimensions to support consistent cabinet layouts. The 1-1/4 inch head, 3/4 inch base, and 7/8 inch projection provide predictable sizing for aligning doors and drawers across a run of cabinetry. With its 8-32 x 1 inch screw size and Traditional Series styling, this knob fits projects where a compact, classic pull point and clear dimensional references are important to the finished result.