Schaub Traditional Series knob in the 703-DBZ model is a solid brass cabinet knob in a distressed bronze finish that provides a traditional look for cabinet doors and drawers where a classic metal feel is wanted. The 1-1/4 inch (32 mm) diameter face offers a comfortable grip area that installers can align easily with typical cabinet layouts. A 3/4 inch base diameter steps the knob down to the door or drawer surface, which helps create a defined footprint that works well when spacing multiple knobs in a run. The 7/8 inch projection sets the knob out from the face just enough for fingers to catch it cleanly, supporting repeated use without crowding adjacent edges. Made from solid brass, the knob provides a metal construction that supports a substantial feel when operated in daily cabinet use.
This Schaub and Company knob uses a 1-1/4 inch (32 mm) diameter, giving installers a clear reference when matching existing hardware or drilling new fronts for a traditional cabinet layout. The 3/4 inch base diameter defines how much of the door or drawer front is visually covered around the mounting hole, which is important when working with detailed profiles or panel edges. With a 7/8 inch projection from the surface, the knob stands out far enough for comfortable hand clearance while staying tight to the face for a neat appearance on face-frame or frameless cabinets. The manufacturer part number 703-DBZ identifies this specific combination of Traditional Series design, solid brass material, and distressed bronze finish for repeat ordering or matching runs.
The Schaub Traditional Designs Series distressed bronze 1-1/4 inch diameter knob is suited for cabinet doors and drawers where a traditional metal knob is required. Its solid brass construction provides a sturdy metal feel that pairs well with wood cabinetry in kitchens, bathrooms, or built-ins that call for decorative hardware. The distressed bronze finish supports use in projects that feature other bronze-toned hinges or pulls, helping maintain a consistent appearance across the hardware set. Because the knob sits 7/8 inch off the face, it provides enough reach for hands even on thicker drawer fronts, which is useful on furniture-style cabinets. The 3/4 inch base fits comfortably on standard stile and rail widths, which helps installers position the knob without crowding panel details.
The 1-1/4 inch (32 mm) diameter of this 703-DBZ cabinet knob gives a repeatable reference point when laying out drilling patterns, so installers can transfer measurements from jigs or templates without adjusting for unusual sizes. The 3/4 inch base diameter focuses the load around the mounting point, which helps the knob seat flat against the surface for a clean look from job to job. With a 7/8 inch projection, the knob keeps a consistent stand-off that looks uniform across a full bank of doors and drawers, which matters when lining hardware along long runs. The solid brass material supports a consistent weight and feel from piece to piece, so multiple knobs in a project operate with the same hand feedback. The Schaub Traditional Series designation ties this knob to a recognizable decorative hardware line, simplifying product selection when matching other Traditional Series components in the same space.
The Schaub 703-DBZ knob is made from solid brass, which provides a metal construction that gives cabinets a substantial feel and supports a traditional decorative hardware look.
The 703-DBZ cabinet knob has a distressed bronze finish that creates a darker, aged appearance, helping it coordinate with traditional cabinetry and other bronze-toned hardware.
The Schaub Traditional Series knob has a 1-1/4 inch (32 mm) diameter face, giving a comfortable grip area and a clear reference size when matching or laying out hardware.
This distressed bronze knob projects 7/8 inch from the cabinet surface, providing finger clearance while keeping the hardware close to the door or drawer front for a tidy look.
The 703-DBZ cabinet knob has a 3/4 inch base diameter, defining the footprint on the door or drawer front and helping position knobs around panel and edge details.
This Schaub and Company knob is identified by manufacturer part number 703-DBZ, which specifies the Traditional Series design, solid brass material, and distressed bronze finish.
The Schaub Traditional Series knob in distressed bronze combines a 1-1/4 inch diameter, 3/4 inch base, and 7/8 inch projection in solid brass to deliver a consistent cabinet pull point. For projects that call for traditional decorative hardware with a defined grip and a recognizable 703-DBZ reference, this knob from Wurth Baer Supply supports straightforward selection and repeat use across matching cabinet installations.
Sold In: 1 Each