1-1/2 inch Versailles knob backplate describes a round decorative plate sized for a 1-1/2 inch diameter footprint, so it visually frames the knob base and defines the contact area on the door or drawer face. The Schaub and Company Versailles Series design ties this backplate to the broader Versailles collection, which helps a shop match existing Versailles hardware across a project for a consistent look from cabinet to cabinet. The solid brass construction stated in the description means the backplate body is made from brass, so it provides a firm bearing surface behind the knob that resists deformation under normal tightening torque. The satin nickel finish specified in the data gives the face its color and sheen, so it coordinates with satin nickel knobs and hinges for a unified finish across the installation.
The specified 1-1/2 inch diameter on this Schaub and Company backplate sets the footprint where the knob meets the cabinet, so layout can be planned confidently on narrow stiles or drawer fronts. The 1/8 inch projection described in the data establishes how far the backplate stands off the surface, so the installer knows how much build-out sits between the knob base and the wood face. The SAP description stating solid brass construction indicates a metal body behind the finish, so the backplate presents a stable bearing surface when tightening the knob to final torque. The satin nickel finish noted in the description defines the final color and sheen, so it aligns with satin nickel knobs to keep the face hardware visually unified across a project.
The classification under Decorative Hardware & Moldings and Backplates places this piece in the decorative hardware role, so it is suited to sit directly behind a cabinet knob on doors and drawers. The 1-1/2 inch diameter cited in the description makes the footprint relatively compact, so it can be laid out on standard cabinet stiles and smaller drawer fronts without crowding adjacent edges. The satin nickel finish specified for this Versailles Series part gives it a neutral metallic appearance, so it aligns with satin nickel knob and hinge selections commonly used in kitchens, baths, and built-ins. The Versailles Series naming ties it to that specific collection, so it fits visually when a project uses Versailles-pattern knobs or pulls on the same fronts.
The SAP description calling out solid brass construction points to a metal body that supports the knob base, so tightening the knob screw bears on a rigid surface rather than compressing into softer material. The 1/8 inch projection value defines a consistent stand-off from the cabinet face, so rows of knobs with this backplate will present a uniform spacing that reads clean on finished runs. The manufacturer part number 756-15 uniquely identifies this exact satin nickel Versailles backplate, so shops can reorder the same detail for future phases or service work without requalifying dimensions. The description listing screw size 8-32 x 1 inch defines the thread and length typically paired with this backplate, so fabricators can select compatible knob fasteners when planning material for the job.
The Schaub and Company Versailles Series backplate is specified at 1-1/2 inch diameter, so it sets a compact footprint around the knob base on cabinet doors and drawers.
The 756-15 backplate is described as solid brass, so the body is brass under the satin nickel finish, providing a firm support surface behind the knob.
This Versailles Series backplate is finished in satin nickel, so it visually matches satin nickel knobs and other satin nickel decorative hardware on the same project.
The backplate projection is listed as 1/8 inch, so it creates a slight stand-off that establishes consistent spacing between the knob base and the cabinet surface.
The web description specifies screw size 8-32 x 1 inch, so this defines the thread and length commonly matched to the backplate and knob assembly.
The manufacturer part number for this Versailles satin nickel backplate is 756-15, so it can be referenced directly when sourcing or reordering.
The 1-1/2 inch Versailles knob backplate in satin nickel from Schaub and Company combines a defined 1-1/2 inch diameter with 1/8 inch projection and solid brass construction, so it provides a compact, stable base behind a knob. The satin nickel finish and Versailles Series styling tie directly into satin nickel decorative hardware programs, so it fits visually when a project calls for that collection. Using the 756-15 part number and the stated 8-32 x 1 inch screw size, buyers can align this backplate with compatible knobs and fasteners for cabinet and millwork runs.