Berenson Valencia Series Brushed Nickel 1-3/16" (30 mm) Diameter Knob, - 7011-1BPN-C
Description
Berenson Valencia Series Knob For Cabinets
Berenson Valencia Series knob gives cabinets a brushed nickel round pull point that suits professional shops and serious DIY work. This knob uses zinc die cast construction, which provides a solid metal feel that handles everyday door and drawer use. The 1-3/16 inch diameter face creates a clear grab point, so fingers find the knob quickly on upper and base cabinets. A 13/16 inch base diameter steps that force down to the door or drawer surface, which helps spread load where the knob meets the panel. The 7/8 inch projection sets the hand away from the face just enough, so fingers clear typical cabinet fronts during operation. Brushed nickel finish adds a muted metal look, which works well when tying together hinges, slides, and pulls in the same finish family.
Key Valencia Knob Details That Support Work
- The Valencia Series design groups this knob with matching decorative hardware, which simplifies planning a consistent look across doors and drawers on the same job.
- The 1-3/16 inch diameter face presents a generous contact area, which helps users grip securely on both small drawer fronts and wider cabinet doors.
- The brushed nickel finish provides a soft metallic appearance, which helps the knob blend with many common hinge and slide finishes on shop projects.
- The zinc die cast material delivers a metal body, which supports repeated pulling on cabinet doors and drawers in daily residential or light commercial use.
- The 7/8 inch projection offsets the knob from the surface, which gives fingers clearance behind the knob on thicker front profiles.
Cabinet Knob Fit, Diameter, And Mounting Use
The Valencia knob uses a length or diameter of 1-3/16 inch, which suits standard cabinet layouts where knobs sit near door or drawer edges. The base diameter of 13/16 inch concentrates the mounting footprint, which helps the knob land cleanly on narrow stiles and rails. A 7/8 inch projection defines how far the knob stands off the surface, which keeps the hand away from the panel while still looking compact on smaller fronts. The M4 x 45mm screw size matches the threaded connection for this knob, which supports straightforward mounting into drilled cabinet fronts that accept metric knob threads.
Using The Valencia Knob In Real Projects
Where This Brushed Nickel Cabinet Knob Works
This Berenson Valencia Series knob fits cabinet and drawer fronts that call for a single round pull point, because its 1-3/16 inch diameter face gives enough room for fingers across many door sizes. The brushed nickel finish lets the knob visually coordinate with other brushed nickel decorative hardware and moldings, aligning doors, drawers, and trim in one project. Zinc die cast construction suits typical cabinet environments where hardware sees frequent opening and closing, keeping a solid touch for kitchen, bath, or shop cabinets. The 7/8 inch projection positions the gripping surface slightly off the door or drawer, which helps when fronts have edge profiles or applied moldings around the pull location.
Details That Help Repeatable Knob Installation
The 1-3/16 inch diameter measurement on both width and face allows templating with a single center point, which simplifies layout when multiple fronts need matching knob placement. A 13/16 inch base diameter defines the footprint against the surface, making it easier to judge edge distance so the knob does not overhang narrow stiles. The M4 x 45mm screw size identifies the thread and typical reach through standard cabinet fronts, which supports consistent drilling and prep work across a run of doors and drawers. The 7/8 inch projection provides a fixed stand-off dimension, which helps installers align this knob visually with neighboring pulls or knobs that share similar projection.
Common Questions About This Valencia Series Knob
What is the overall size of the Valencia knob face?
The Berenson Valencia Series knob has a 1-3/16 inch diameter face, which offers a comfortable grip area for both cabinet doors and drawers.
How far does this brushed nickel knob project from the door?
The knob projects 7/8 inch from the mounting surface, which spaces the hand away from the cabinet face while keeping the profile compact.
What material is the 7011-1BPN-C Valencia knob made from?
The 7011-1BPN-C knob uses zinc die cast construction, giving it a solid metal body suitable for routine cabinet door and drawer use.
What is the base diameter where the knob meets the cabinet?
This Valencia knob has a 13/16 inch base diameter, which creates a defined contact area on the cabinet surface for a clean look.
What screw size does this Valencia Series knob use?
The Berenson Valencia Series knob uses an M4 x 45mm screw size, which matches the threaded mounting connection through the cabinet front.
What finish does the Berenson Valencia Series knob have?
The knob has a brushed nickel finish, which provides a soft metallic appearance that coordinates with other brushed nickel decorative hardware.
Selecting This Knob For Cabinet Projects
The Berenson Valencia Series knob in brushed nickel ties together a 1-3/16 inch diameter face, 13/16 inch base, and 7/8 inch projection, giving cabinets a consistent pull point across doors and drawers. With zinc die cast construction and an M4 x 45mm screw size, this 7011-1BPN-C knob supports straightforward cabinet hardware planning when a round brushed nickel knob is needed.