
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Genesis drawer side materials 2-3/4 x 5 describe pre-finished Baltic Birch plywood blanks that provide consistent stock for building drawer boxes in a repeatable way. The 2-3/4 inch height controls finished drawer side dimension, which helps standardize box proportions across a run. Each blank length is 5 feet, so one length can be cut into multiple sides for typical cabinet drawer widths. Russian Birch plywood blanks use first quality Russian Birch veneers, giving a uniform appearance wherever exposed grain is visible. Those veneers are bonded to ANSI/BIFMA spec 7 layer plywood cores, creating a stable core structure that supports machining for joinery. All wood blanks are pre-finished with Endura ultra violet cured top coat, so surfaces arrive with a cured finish that eliminates separate finishing steps on the interior faces.
The 2-3/4 inch drawer side height defines a low drawer profile that suits smaller cabinet drawer applications while holding consistent vertical dimension across a project. The 1/4 inch drawer bottom dado is already machined into each blank, so drawer bottoms slide into a fixed groove without extra layout steps. That dado dimension matches common 1/4 inch bottom material, helping the bottom sit flush and supported along the side. The 3/8 inch, or 10 mm, bottom reveal is built into the profile, so the distance from the drawer bottom to the outer edge repeats from piece to piece. With a square edge profile, these blanks present straight faces for attaching fronts and backs using typical joinery setups.
Russian Birch plywood drawer blanks in this Genesis drawer side materials 2-3/4 x 5 format fit applications where a Baltic Birch drawer side is preferred for its visual consistency and grain tightness. The Russian Birch used is noted for consistency in color and tightness of grain, so exposed sides and tops of drawers present a coordinated look across a bank of cabinets. At 2-3/4 inches high, these sides suit shallower drawers, such as tool, utensil, or small-part storage drawers within cabinetry. The 5 foot length of each blank supports cutting multiple matching sides from one piece, which aligns with batch production of standard-width drawers in a shop setting. Because these blanks are part of Genesis high quality drawer blank systems, they integrate into a wider system approach to drawer construction based around uniform dimensions.
The Endura ultra violet cured top coat on all wood blanks provides a completed finish on interior surfaces, which means once the drawer is assembled from these plywood sides, the internal faces already have a cured coating for typical drawer use. Ultra violet cured coatings are applied and cured before shipment, so there is no need to apply finish to the sides after machining. The built-in 1/4 inch drawer bottom dado runs the length of each blank, guiding placement of the drawer bottom and helping it stay square as other joints are clamped or fastened. The 3/8 inch, or 10 mm, bottom reveal baked into the profile keeps the bottom panel slightly up from the underside edge, giving a consistent edge line on a run of drawers. With a square edge profile along the top and outer faces, the blanks offer straight reference surfaces when aligning fronts, backs, and any applied edges during assembly.
These Genesis drawer side blanks use Russian Birch plywood made from first quality Russian Birch veneers bonded to ANSI/BIFMA spec 7 layer plywood cores for stable cabinet drawer construction.
The Genesis 27560-RBP drawer side is 2-3/4 inches high and 60 inches long, giving a 5 foot blank that can be cut into multiple drawer side lengths for cabinet projects.
The drawer blanks are pre-finished with Endura ultra violet cured top coat, so the plywood drawer side surfaces arrive with a cured finish on the wood.
Each drawer side blank has a 1/4 inch drawer bottom dado, allowing a matching bottom panel to seat into the groove along the length of the side.
These Genesis drawer blanks have a 3/8 inch, or 10 mm, bottom reveal, creating a consistent offset from the bottom panel to the drawer side edge.
These Russian Birch drawer side blanks have a square edge profile, giving straight reference edges suited to typical cabinet drawer joinery layouts.
Genesis drawer side materials 2-3/4 x 5 deliver Russian Birch plywood blanks sized for cabinet drawer construction with a defined 2-3/4 inch height and 5 foot length. The pre-machined 1/4 inch drawer bottom dado and 3/8 inch bottom reveal provide repeatable geometry for setting drawer bottoms. With first quality Russian Birch veneers over ANSI/BIFMA spec 7 layer plywood cores, these blanks suit projects where consistent color, grain tightness, and stable machining are priorities. The Endura ultra violet cured top coat brings a ready-finished surface to the job, supporting efficient drawer box production when selecting drawer side materials for cabinetry.
Sold In: 1 Each