
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Genesis drawer side blanks give cabinet shops a ready-to-assemble starting point for building drawer boxes with consistent materials and dimensions. The 5 inch by 60 inch Baltic Birch format sets a predictable side height and stock length, which helps standardize drawer construction across a job. The blanks are part of the Genesis drawer blank systems, so they align with a systematic approach to building drawers rather than one-off components. The product is built as a drawer side blank, so it is intended to be cut and machined to final drawer dimensions according to the project layout. Each blank is designed to accept a 1/4 inch drawer bottom in a factory-machined dado, tying the side material directly to the bottom material thickness during assembly. The 3/8 inch, or 10 mm, bottom reveal defines how far the drawer bottom sits up from the underside of the side, which affects the visual line and clearance at the cabinet opening.
The Russian Birch plywood blanks use first quality Russian Birch veneers bonded to ANSI/BIFMA spec 7 layer plywood cores, giving a predictable core structure as cuts and joinery are laid out along the 60 inch length. The consistency in color and tightness of grain across the Russian Birch faces supports uniform appearance when multiple drawer boxes sit in the same bank. The 1/4 inch bottom dado is already centered relative to the design, so cabinetmakers can size bottoms to thickness rather than cutting new grooves. The 3/8 inch, or 10 mm, bottom reveal becomes a fixed setup dimension, which simplifies planning drawer front sizing and slide positioning around the established bottom line. The pre-finished Endura ultra violet cured top coat allows drawer box components to move from cutting and machining directly to assembly without a separate coating step.
The 5 inch by 60 inch Baltic Birch drawer side blank suits drawer construction where a mid-height side is needed, because the 5 inch height lands in a common range for kitchen, bath, or shop storage drawers. The 60 inch length supports cutting multiple matching sides or pairs from a single blank, which fits production runs that combine several drawers of similar depth. As part of a drawer construction system, the blank plays the role of the side component while working with a standard 1/4 inch bottom, so the material choice aligns with typical panel stock kept in a cabinet shop. The Russian Birch plywood composition with ANSI/BIFMA spec 7 layer cores means the sides are built from a structured core, which matters when machining joinery at the ends for fronts, backs, or runners. The noted consistency in color and tightness of grain helps maintain a unified appearance when drawers are built as a coordinated bank.
The pre-finished Endura ultra violet cured top coat on all wood blanks provides a surface that is already sealed and coated, which supports predictable gluing and assembly sequences because the interior faces do not require additional finishing time. The factory-cut 1/4 inch drawer bottom dado keeps the groove location uniform from part to part, which simplifies jig setup when aligning drawer bottoms in a clamping fixture. The 3/8 inch, or 10 mm, bottom reveal becomes a standard reference dimension during layout, so drawer fronts and slide locations can be planned around a consistent bottom position. The square edge profile of the blanks gives straight reference edges for fence and guide use, supporting accurate crosscuts when cutting multiple sides to length. The Russian Birch veneers over the 7 layer plywood core respond in a similar way along the entire blank length, which supports repeatable machining of locking joints, rabbets, or dowel holes where needed. Because blank lengths are 5 feet, layout of different drawer depths along one piece can be planned to reduce offcuts while keeping matching pairs aligned.
Genesis drawer side blanks use Russian Birch plywood blanks made from first quality Russian Birch veneers bonded to ANSI/BIFMA spec 7 layer plywood cores, which supports stable drawer side construction.
The Genesis Baltic Birch drawer side blank is 5 inches high by 60 inches long, so multiple drawer sides can be cut from one length for different drawer depths.
The drawer side blank has a 1/4 inch drawer bottom dado and a 3/8 inch, or 10 mm, bottom reveal, so a 1/4 inch bottom panel seats in a defined position along the side.
The wood drawer side blank is pre-finished with the Endura ultra violet cured top coat, allowing the machined parts to move directly into assembly without separate finishing steps.
The square edge profile provides straight reference edges for sawing and joinery cuts, which supports tight alignment between the drawer side, front, and back pieces.
The BS127RB part number identifies this 5 inch by 60 inch Genesis Baltic Birch drawer side within the Genesis drawer blank systems, which helps match material and dimensions on repeat orders.
The Genesis 5 inch by 60 inch Baltic Birch drawer side blank, part number BS127RB, ties side height, length, and bottom groove into one consistent component. The Russian Birch plywood with ANSI/BIFMA spec 7 layer cores provides a reliable base for machining joinery across multiple projects. The factory-cut 1/4 inch bottom dado and fixed 3/8 inch, or 10 mm, bottom reveal lock in bottom thickness and position, which supports planning drawer fronts and slides around a known reference. With the Endura ultra violet cured top coat already on the wood surface, the shop workflow can move from cutting and machining these blanks directly to assembling drawer boxes that align with the Genesis drawer construction systems.
Sold In: 1 Each